Professional graphic equaliser with long-throw 45mm oil-damped faders with dust cover for increased accuracy and resolution. Characterised by its extremely quiet operation, typically >2dB quieter than any comparable product. This alone has made it a broadcast-industry standard for many years. The two channels are linkable for true stereo operation, and both the compressor and expander sections are fitted with their own side chain inputs.
Two channels of full function compression, expansion, limiting and peak clipping in one unit of rack space
Variable knee control for compression styles from hard to easy
Auto attack/release mode for inaudible compression and easy set-up
Manual attack/release mode for creating compression effects
Advanced VCA design for extremely low noise and distortion
Flexible expander section features variable ratio for gentle expansion or hard gating
Separate side chain inputs are provided for compressor and expander sections
A peak limiter with variable threshold and programme related release provides additional protection
Peak clipper eliminates transient overload and tracks limiter threshold for total protection
Equalizer Type - Graphic Equalizer
Width:
482mm (19 inch)
Depth:
292mm (11.5 inch)
Height:
44.5mm (1.75 inch)
Input two type:
Electronically balanced (pin 2 hot)
Side Chain Inputs Two Type:
Electronically balanced (tip hot)
Audio Outputs Two type:
Electronically balanced (pin 2 hot)
Minimum Load Impedance:
600 ohms
Source Impedance:
<60 ohms
Maximum Level:
+22 dBu
Frequency Response:
20Hz to 20kHz, ±0.5 dB
Equivalent Input Noise:
<-94 dB (20Hz to 20kHz unweighted)
Compressor Threshold:
-30 to +20 dB
Compressor Ratio:
1:1 to 50:1
Compressor Knee:
1 (Hard) to 40 (soft) dB
Compressor Envelope:
switchable auto (attack and release controls disabled) or manual
Compressor Attack (90% capture):
50us to 20ms
Compressor Release (90% recovery):
60ms to 2 secs
Expander Threshold:
-40 to +20 dB
Expander Ratio:
1:1 to 25:1
Expander Attack Switchable:
auto or fixed (2ms)
Expander Release (90% recovery):
40ms to 2 secs
Expander Output Gain:
-10 to +30 dB
Limited/Clipper Threshold:
0 to +20 dB
Power:
IEC
AC Voltage:
240 Volts
Depth:
11.50 in
Height:
1.75 in
Width:
19 in
Product Weight:
11.02 lbs
Shipping Weight:
13.23 lbs
Impedance:
600 ohm
DN100
- Direct Injection Box with Ground-up Redesign
DN1248PLUS
- 12-channel 48-output Active Microphone Splitter
DN360
- Analogue Graphic Equalizer with Earth Lift Switch Enables Signal and Chassis Grounds
DN370
- Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
DN504 Plus
- Quad Compressor/Limiter with Switchable Knee Function