Direct injection box with ground-up redesign provides an extended dynamic range. Lower noise floor and all the world-class audio performance. Designed to handle the rigours of life on the road. Thick aluminum shell protects electronics and this in turn is protected by a tough silicone rubber casing, which is replaceable and available as a spare part.
Phantom (+48V) powered
Accepts a maximum input level of +40dBu
Switchable -30dB input pad
Earth lift switch isolates input and output grounds
Extended dynamic range and lower noise floor
Rugged thick aluminium shell and tough silicone rubber casing
Security slot for Kensington MicroSaver security cable
Pad (-30dB), earth lift and +48V phantom LED indicators
Extended low frequency response
Splitter Type - Audio
Warranty - Yes
Noise:
-100dBu, 20Hz to 20kHz unweighted, with input terminated by 10k resistor
Width:
106mm (4.2 inch)
Height:
60mm (2.35 inch)
Depth:
5.59 in
Height:
2.36 in
Width:
4.17 in
Product Weight:
2.20 lbs
Warranty (Length/Type):
3 Years
Noise:
-100dBu, 20Hz to 20kHz unweighted, with input terminated by 10kohms resistor
Noise:
-100dBu, 20Hz to 20kHz unweighted, with input terminated by 10kohms resistor
Current Draw:
0.01 Amps
DC Voltage:
48 Volts
Shipping Weight:
18.52 lbs
Input Type:
Active electronic, balanced or unbalanced
Input Overall Length:
2 quarter inch jacks and 3-pin XLR linked in parallel
Input Maximum Level:
30 dBu
Input Attenuator:
30 dB Switchable
Output Type:
Transformer Isolated, balanced
Output Overall Length:
3-pin XLR
Output Maximum Level:
10dBu with load >2kohms
Output Minimum Load:
600 ohms
Frequency Response:
+0.5/-1dB 20Hz to 20kHz
Distortion (THD+N) output:
<0.01% at 1kHz, +4dBu
DN360
- Analogue Graphic Equalizer with Earth Lift Switch Enables Signal and Chassis Grounds
DN370
- Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
DN500 Plus
- Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
DN504 Plus
- Quad Compressor/Limiter with Switchable Knee Function