Fiber Optic Systems : Fiber Optic Converters : Ensemble Designs - BE 10

Optical/SD SDI to Analog/SDI Converter

Series: BrightEye

Model: BE 10

Use with VCRs, cameras and satellite receivers
Analog video inputs and outputs
TBC and frame sync
12-bit processing
Passes embedded audio

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

This BrightEye 10 is a optical/SD SDI to analog/SDI converter with both SD SDI (electrical) and fiber optic inputs. Output formats include Beta and SMPTE component, RGB and composite (with simultaneous Y/C). Video processing, encoding and analog conversion is performed digitally at 12 bits of resolution with 8x oversampling. Front panel controls select between the optical and SDI input, choose the analog output format and adjust gain. Video levels can be adjusted through BrightEye Mac or PC software. The reclocked SD SDI output follows the input selector, thus providing optical to electrical conversion when the optical input is selected. BrightEye 10 combines fiber to SD SDI conversion and QC monitoring in one compact unit.

Use with VCRs, cameras and satellite receivers
Analog video inputs and outputs
TBC and frame sync
12-bit processing
Passes embedded audio
With both SD SDI and fiber optic inputs
Output format includes Beta and SMPTE component, RGB and composite

Warranty - Yes
Spec Sheet available - Yes

AC Voltage: 230 Volts
DC Voltage: 12 Volts
Peak Power: 4 Watt
Depth: 5.50 in
Height: 0.80 in
Width: 5.63 in
Product Weight: 0.94 lbs
Warranty (Length/Type): 5 years
Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Number of Serial Digital Input: 1
Serial Digital Input Signal Type: 270Mbps SD Serial Digital (SMPTE 259M)
Serial Digital Input Impedance: 75 ohms
Serial Digital Input Return Loss: >15 dB
Number of Optical Input: 1
Optical Input Type: SD (SMPTE 297M, Optical Equivalent of 259M)
Optical Input Wavelength: 830 to 1610 Nm
Optical Input Receiver Sensitivity: -18 dBm
Number of Analog Output: 1
Analog Output Types: Beta/SMPTE, Y, Pr, Pb/RGB/NTSC, PAL Composite/NTSC, PAL S-Video
Analog Output Return Loss: >40 dB
Number of Serial Digital Output: 1
Serial Digital Output Type: 270Mbps SD Serial Digital (SMPTE 259M)
Serial Digital Output Impedance: 75 ohms
Serial Digital Output Return loss: >15 dB
Serial Digital Output DC: <50 mV
SDI to Analog Performance Bit Resolution: 12 bits
SDI to Analog Performance Signal to Noise Ratio: >65 dB
SDI to Analog Performance Frequency Response: 0 to 5.5 MHz (+/-0.1dB)
SDI to Analog Performance K Factor: <1 %
Relative Humidity: 0 to 95 % (Non-condensing)

BE1 - Analog/SD SDI to SD SDI/Optical Converter with TBC and Frame Sync

BE11 - 12-bit SD SDI to Analog Converter

BE11-HD - 12-bit HD/SD SDI to Analog Converter

BE15 - SDI to Analog Converter with Frame Sync/Genlock

BE16 - SDI to Analog Video Converter with Frame Sync/Genlock and Audio Disembedder

5BE26.pdf 531 kb - Data Sheet

Project List

Application Note - BrightEye Control Over Ethernet 543 kb - Other

Project List

Find a Dealer

Suggested Products

Optical to Optical Wavelength Shifter/Regenerator, CWDM DFB Laser, Dual Line, Standard Receiver, VistaLINK®

by Evertz

Optical to Optical Wavelength Shifter/Regenerator, CWDM DFB Laser and High Sensitivity Receiver (Line Side), VistaLINK®

by Evertz

19.4Mb/s or 143-540Mb/s SDI Electrical to Optical Converter

by Evertz