SDI electrical to optical converter for all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s. Supports SMPTE ST 310 (19.4Mb/s), M2S, DVB-ASI (270Mb/s), SMPTE ST 344 (540Mb/s) and SMPTE ST 305 (SDTi) rates. Comprehensive signal and status monitoring via four-digit card-edge display or remotely through SNMP and VistaLINK capability.
Electrical to optical converter for all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
Supports SMPTE ST 310 (19.4Mb/s), M2S, DVB-ASI (270Mb/s), SMPTE ST 344 (540Mb/s) and SMPTE ST 305 (SDTi) rates
Detection and display of input equalization, video format and EDH errors
Automatic coaxial input equalization to up 275m at 270Mb/s (Belden 8281)
Reclocked optical and electrical outputs
Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports multi-mode and single-mode fiber
Fully hot swappable from front of frame
Comprehensive signal and status monitoring via four-digit card-edge display or remotely through SNMP and VistaLINK capability
VistaLINK capable for remote monitoring via SNMP (using VistaLINK PRO) when installed in 7800FR frame with a 7700FC VistaLINK frame controller
Spec Sheet available - Yes
Certifications:
FCC
DC Voltage:
12 Volts
Active Power:
9 Watt
Regulatory Compliance:
EU EMC
7707EO-3
- 19.4Mb/s or 143-540Mb/s Triple SDI Electrical to Optical Converter
7707EO-3-HD
- 19.4Mb/s to 1.485Gb/s Triple HD Electrical to Optical Converter
7707EO-3G
- 3G/HD/SD Electrical to Optical Converter