An essential tool when mixing 4K & 2K screens on the same distribution system, the CON-H2-SCL enables in-line scaling of HDMI content. An HDMI signal from a source device, DA or matrix is converted so that it can be accepted by the connected display. Via a powerful scaling chip, 4K/60 4:4:4 or 4:2:0 can be down-scaled to as low as 480P; likewise, content can be up-scaled to 4K/60 4:4:4. Set up & configuration is done using a simple PC tool which is part of WyreStorm Management Suite V1.6. The software tool allows management of the scaling function and EDID via a simple interface.
Scales any incoming HDMI content to as low as 800x600 or up to 4096x2160
Compatible with incoming 18Gbps HDMI content up to 2160p 4:4:4/60
Converts HDR content and removes metadata for compatibility with all displays
Converts HDCP encryption to match that of a connected display or projector
Optical audio output for de-embedded source audio (2ch PCM)
Setup & configuration via simple PC configuration tool (WyreStorm Management Suite v1.6 or higher)
Powered by 12v DC power supply (US, UK, EU and AU PSU pins included)
Mounting brackets included
USB-3-pin phoenix cable required for setup (not included) – use p/n CAB-USB-PX1
Full scaling list: Auto set (based on EDID from display) 4096x2160/60, 4096x2160/30, 4096x2160/25, 4096x2160/24, 3840x2160/60, 3840x2160/50, 3840x2160/30, 3840x2160/25, 3840x2160/24, 1920x1200/60, 1920x1080/60, 1920x1080/50, 1280x720/60, 1280x720/50, 1680x1050/60, 1600x1200/60, 1600x900/60, 1440x900/60, 1366x768/60, 1360x768/60, 1280x1024/60, 1280x960/60, 1280x800/60, 1280x768/60, 1024x768/60, 800x600/60