The EMX control surface is a fully integrated standalone console for on-air and production applications. It is available in three Surface frame sizes that hold 16, 20, or 28 fader channels and features four stereo program buses, two stereo auxiliary buses, and a bus-minus system that allows Telco (mix-minus) devices to be used on any fader.
The EMX Meter Bridge has dedicated meters for the PGM 1, PGM 2, and PGM 3 bus signals plus a switched meter to show levels for PGM 4, Telco Record, two user-set external signals, or a wild on-the-fly selection. The meters can show Average-only, Peak-only, or Average and Peak levels. The switched meter can also be set to show Cue levels while Cue is active. A count-up timer and stereo cue speakers are also included. Each channel has a large-knob “Channel Encoder” (the Magic Knob) to select a new channel source and, if enabled for operator use, access to the built-in Advanced Channel Features: audio mode, panning, EQ & Dynamics, and Aux Send levels, which are included on every channel. Each fader channel also has three user-set “Soft” buttons to customize channel functionality, plus cue control and two buttons (Talkback and Auto FB) which simplify taking calls and doing live remotes. The Monitor Control panel buttons and controls support the Control Room, an associated Studio, and an External location, along with having the controls for the built-in timer and to save and recall console Events.
- Modular console, 4 fader channels per module, 1 monitor module
- Separate rackmounted power supply (redundant/spare available)
- 4 Stereo MAIN (PGM) buses
- 2 Stereo AUX buses
- Stereo CUE bus and built in CUE amplifier and speakers
- Stereo HEADPHONE circuit with built in amplifier
- Dedicated 2-channel TELCO output configured for convenient use with VoxPro editing software
- Built-in bus minus system allows separate mix minus feed from every fader channel
- Individual talkback button on each fader channel
- Auto Foldback function switches mix minus feed depending on channel ON/OFF status
- Built-in 4-band fully parametric EQ on every fader channel
- Built-in parametric HPF and LPF on every fader channel
- Built-in compressor-limiter-expander on every fader channel
- Pan control on every fader channel
- Multi-function encoder on each fader channel for source selection and to adjust (access-controlled)
- Full color OLED display screen on every fader channel to show channel settings
- LED illuminated switches
- Built in automation control interface allows external control of the surface from 3rd party devices, Tablets, and software applications
- 3 user-set soft buttons on each channel for hot source selections, EQ in/out, Aux pre/post, etc. Set using the EMX surface setup app
- Extensive monitor select systems for control room and studio give easy access to all program buses, two externals, telco, user programmed and wild on-the fly
- LED meter bridge with high resolution meters (programmable for average, peak, or peak dot over average bar) and separate overload and on-air indicators dedicated meters for PGM 1, PGM 2, and PGM 3
- Switched meter allows display of levels for two Externals, Telco, PGM 4, cue, plus wild on-the-fly selection
- Front panel selectable Split Cue function puts sum of currently selected program in the left side and CUE in the right side of the Headphone feed
- Full color OLED displays for control and studio showing current source and level
- Complete console set ups can be saved as Events and recalled when needed
- Full color OLED display for Event save/restore selection
- Front panel level controls for talkback to control room and talkback to studio
- Complete Logic over IP system connects with Automation systems, talent panels, script engines, and GPIO ports with no extra wiring Access protection of multiple functions
