Standard Definition (SD-SDI) SMPTE259M 270/360Mbps 400 meters
High Definition (HD-SDI) SMPTE292M 1.5485Gbps 200 meters
High Definition (3G-SDI) SMPTE242M 2.97Gpbs 120 meters
Table 1 SDI Signal Types and Optimized range using Belden 1694A
13 & 83 Series units automatically detect the incoming serial data stream and suppress accumulated jitter by retiming to the recovered phase-locked data rate
The 13 and 83 Series Serial Digital Interface (SDI) 3G/HD/SD Distribution Amplifiers (DA’s) included in this manual provide a way of distributing one SDI signal to two or four other devices. Dual and Quad DA’s provide a way of distributing two or four SDI signals to two other devices for each SDI input. Each SDI input features adaptive cable equalization and re-clocking of data rates from 125Mbps to 2.97Gbps.
Standard Definition (SD-SDI) SMPTE259M 270/360Mbps 400 meters
High Definition (HD-SDI) SMPTE292M 1.5485Gbps 200 meters
High Definition (3G-SDI) SMPTE242M 2.97Gpbs 120 meters
Table 1 SDI Signal Types and Optimized range using Belden 1694A
13 & 83 Series units automatically detect the incoming serial data stream and suppress accumulated jitter by retiming to the recovered phase-locked data rate
All outputs cable drivers incorporate selectable slew rate control. SDI input and output connections are via high speed BNC connectors
Use of high quality connectors and cable (Belden 1694A or equivalent) is highly recommended to achieve optimum performance
Universal Serial Bus (USB) port/interface (multiple) provides the unit maintenance interface
Permits the user to view and change the default configuration parameters, select specific inputs for system debug, and upgrade firmware
Internal non-volatile memory is used to hold the power up default settings
External power source is isolated from the internal power and will operate correctly from 12-24 VAC or 10-34 VDC