1T-TBC is an ultra compact, high performance multi-standard time base corrector designed to correct for time base errors in videotape playback or to correct for instability in most video signals. An integral digital processing amplifier provides all the necessary adjustments to the video parameters. Black with color burst is sent to the output when the input video is not present. Composite and YC (S-Video) inputs and outputs are provided.
Multi-standard for worldwide TV systems
Comb filter decoding of the video input
Integral video processor for adjustments
75 ohms impedance
ROHS Compliant - Yes
Warranty - Yes
Spec Sheet available - Yes
Warranty (Length/Type):
2 Years Parts and Labor Limited
DC Voltage:
12 Volts
Depth:
3.50 in
Height:
1.20 in
Width:
5.25 in
Product Weight:
0.69 lbs
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
32 F
Certifications:
FCC, CE, UL
Current Draw:
0.50 Amps
Inputs/Outputs:
Composite Video: 1x via BNC Connector
YC (S-Video): 1x via 4-PIN Mini-DIN Connector
Genlock Input: via BNC (1T-TBC-GL Only)
Genlock Loop-thru: with 757Ω Termination Switch
Video Specifications:
Impedance: 75Ω
Television Standards: NTSC, PAL-B, G, N, M, SECAM
Signal Processing: 8-bit
Frequency Response: Flat to more than 20MHz
Chroma to Luma Delay: <=5ns
Differential Gain: <=0.5%
Differential Phase: <=0.5°
Signal to Noise Ratio: Better than 60db
Video Level Adjustment: Luma,Chroma, Setup, Hue, Sharp
Filter Selection: Adaptive Comb, Low Pass
Control Method:
Display: Front Panel LEDs
Front Panel Buttons: Up, Down, Reset, Select
Environmental:
Operating Humidity: 10 to 90%Non-condensing
Storage Temperature: -10 to +60°C (+14 to +140°F)
Storage Humidity: 10 to 90%, Non-condensing