Heavy-duty DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, standalone power source or an automotive inverter. It supplies up to 2000W of continuous 120Vac power from any 12V battery or automotive DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, 25/100A charging system. In UPS mode, the MRV APS system responds to blackouts and severe voltage fluctuations with near instantaneous automatic transfer to battery-derived AC output. It includes set of high current DC input terminals for simple installation. It has reliable large transformer design with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on start-up. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information. It supports an unlimited amount of runtime with any number of user-supplied batteries connected. It is highly adaptable to variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages. Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion vans, fleet service vehicles, standalone alternative power source for off-grid, alternative energy or export applications and as an uninterruptible power supply (UPS) for items compatible with 16.6ms transfer time.
- Supports 120Vac output from 120Vac line power source or 12Vdc battery source
- DoubleBoost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10s
- 3-stage, selectable 25/100A battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
- Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank
- Protected hardwire output passes 120V line power or inverter output through to connected equipment
- Moisture-resistant construction enables vehicular or marine operation in high humidity environments
- 3-position operating mode switch supports auto mode to enable automatic transfer between DC and AC modes
- Set of 6 front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
- Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system
- Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
- Front panel connector enables remote off/on switching
- Load-sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
- Includes battery temperature sensor with 20ft cable to prolong battery life by adjusting the charge level based on battery temperature
