The CamView HD Pro is designed to facilitate the installation and maintenance of surveillance video equipment. Used with Standard Definition analog NTSC/PAL, HD-TVI, HD-CVI, and AHD camera systems. The Tester has an RS485 port for testing the Pan-Tilt-Zoom (PTZ), and supports more than 30 PTZ protocols. It can also provide 12VDC (not to exceed 1A) to power the analog camera. The Tester also allows you to capture video (snapshots and video recording), play back video, generate video test patterns for monitor checking, and monitor the data flow between the analog camera and the DVR system. You can also use it to check microphone/audio on the camera, or take advantage of the built-in flashlight.
- Tester can display the analog video signal input from an attached analog camera or video source that has both NTSC or PAL format video output
- Tester will display the analog video signal input from an attached HD camera or video source that has up to AHD 2.0, HD-TVI 3.0, or HD-CVI 3.0 format video output
- You can select from several common video test patterns stored in the tester and generate standard definition analog (NTSC or PAL) or 1080P (HD) HD-CVI, HD-TVI, or AHD format video output
- Test cabling, video recorders, and monitors
- Selected video test pattern is displayed on the Tester’s screen along with the analog video input signal for simple visual comparison
- Tester will provide 12VDC output via the “12V 1A Output” jack on the left side of theTester to power an analog camera
- Tester can be used to check audio signal functionality which is input on the Tester’s “Audio In” jack, located on the right side of the Tester
