The 1201-MV is a universal switcher that supports 4Kx2Kat 60Hz 4:4:4, flexible multiview modes, and six video inputs: five HDMI, and one powered USB-C. The HDMI output can be configured to mirror the HDBaseT output or preview the HDMI 1 input. The HDBaseT output can travel up to 328 feet (100m) without any additional amplification, and supports PoC for remotely powering the receiver. The 1201-MV also features automatic source detection & switching, can power displays on and off using CEC or RS232, and offers versatile multiview for showing up to four sources onscreen simultaneously. The universal switcher can extend USB signals-such as cameras and microphones-from the far-end hub, making them available to the system PC or a connected laptop. The 1201-MV is available with or without its hub/receiver.
- Video:
- 5 HDMI inputs & 1 USB-C input with 60W charging
- EDID settings for all inputs – Default is 1080P/60
- Supports an Auto-Switching mode with automatic display power
- Supports HDMI output resolutions up to 4Kx2K @ 60Hz 4:4:4
- Supports HDBaseT output resolutions up to 4Kx2K @ 60Hz 4:2:0
- Default output resolution is 1080P/60
- 12 flexible multiview configurations for showing up to 4 sources at once
- Breakaway HDMI output can preview the HDMI 1 input or mirror the HDBaseT output
- Audio:
- Independent audio input selection during Multiview operation
- Supports both source and mic levels
- Mic with phantom power selection
- Line input for mic mixing
- Control:
- Controllable via RS232, IR remote, front panel buttons, or TCP/IP commands
- RS232 and TCP/IP use a unique, easy-to-use ASCII protocol
- Two RS232 control modes:
- Control of the switcher from both the switcher and hub/receiver (Default)
- Sending RS232 display commands with baud rate setting to the hub/receiver
- Supports sending TEVOX Macro commands for TekMonitor control
- CEC control of displays and receivers
- User-defined CEC commands
- RS232 Command entry for display power
- Bridge LAN network allows for single network connection to switcher and 3rd party devices at hub/receiver
- Selectable power on and off of the POC control for the hub/receiver
- USB:
- Supports bidirectional USB 3.0 simulated hub extension at switcher and hub/receiver
- Automatic bridging of USB hub to USB-C input
- Provides PC or connected laptop access to far-end USB devices (cameras, microphones, etc)
