The Stealth Acoustics Model LR6g is a two-way, full-range loudspeaker system that becomes completely invisible after installation. The loudspeaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area. Installation instructions are shown on a paper overlay that is to be removed before installation. The overlay can also be used as a cutting template for retrofitting the speakers into existing wallboard.
The LR6g may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods may be supported using special techniques.
The Stealth Acoustics LR6g incorporates an acoustically coupled high quality, high-power 6.5" cone woofer and a direct coupled 30 mm neo-magnet high-frequency motor. Advanced internal materials allow for smooth frequency extension to 20kHz. When the LR6g is installed in standard insulated 2" × 4" framing and allowed to function in a full 8 foot stud bay, frequency response below 45Hz can be achieved. The LR6g contains two independent protection circuits (highfrequency and low-frequency sections) that automatically reset upon reduction of excessive amplifier power.
For proper registration, each speaker must be installed so that the surface of the perimeter edge is flush with the adjoining wallboard. When correctly in place, the surface of the speaker face panel extends above the height of the wallboard by 1/16" (1.6 mm). This is done to allow space for the tape and joint compound needed to blend the panel into the wall. Shims are included to allow for mounting in wallboard thicker than ½" (12.7 mm).
Stealth Acoustics’ invisibility offers a powerful advantage over traditional loudspeakers because they can be placed wherever they sound best, free of visual concerns that may conflict with architectural features. Accompanying the full range panels, Stealth Acoustics offers the B22g and B30g – completely invisible companion subwoofers for extended low frequency response.
All Stealth Acoustic products are covered by a 5 year manufacturer’s warranty as well as an optional 15 year extended warranty. The LR6g also has 100, 70 and 25 volt constant voltage transformers available as factory installed options.
