Digital PTZ Camera Extension Kits

Model: RemoteCamUSB2E

Extends camera power (no factory camera
PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
Simple Plug & Play installation, no programming required.
Ethernet streaming video supported on 10/100/1000 capable devices
All hardware-specific camera and codec connection cables included.

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Videos

Sound Control Technologies (SCT) USB camera extension kits are designed to streamline the integration of USB PTZ cameras requiring USB, and Ethernet control. By simplifying complex cabling and extending traditional distance limitations up to 100m, SCT’s extension kits provide integrators with cost and time saving solutions.

Extends camera power (no factory camera
PSU required), PTZ control, audio and video over CAT5e/CAT6 cable up to 100m.
Simple Plug & Play installation, no programming required.
Ethernet streaming video supported on 10/100/1000 capable devices
All hardware-specific camera and codec connection cables included.
PowerSniffer included for testing SCTLink™ cable conductor continuity.
Integrator only required to provide CAT5e/CAT6 SCTLink™ Cable.
Field-upgradable firmware via microSD Card.
Video Format: USB Video typically up to 1080p30/720p60
UVC and IP Camera Control
Two port 10/100/1000 Ethernet switch (RCU2E-HE™): Dual RJ45 connector
100/1000* Ethernet (RCU2E-CE™): RJ45 connector, Passive PoE up to 24W
Power Out Connector (RCU2E-CE™): 5.5x2.5mm DC jack, 12VDC up to 1.2A
USB Connector (RCU2E-CE™): USB-A for Data and 5V Camera Power up to 1.2A
USB Connector (RCU2E-HE™): USB-B 2.0 for Host Connection
Audio In/Out: 3.5mm TRS Jacks, Stereo Line Level Unbalanced
SCTLINK™ CABLE SPECS:
SCT recommends CAT6 or better cable for the SCTLink™. The use of a shielded cable, while not required for most platforms, is highly recommended. Proper termination and testing, along with good cable management, minimizes potential problems.
1000 Mbps only supported for Link cables up to 15m
Wiring Termination Standard T568A or T568B 100m Maximum Length (No Minimum Length)
Power Consumption
A linked kit will consume 4.8W, plus the power consumption of the attached camera.

Warranty - Yes
Spec Sheet available - Yes

Certifications: UL, CE, FCC, CCC, TÜV, RCM+GEMS, LPS, BIS, PSE, CB, DoE VI, CoC V5 and RoHS2
RCU2E-CE™ Camera End Module: Dimension: H: 0.789 x W: 2.264 x D: 3.725 inch; Weight: 0.2 lbs / 90g
RCU2E-HE™ Head End Module: Dimension: H: 1.448 x W: 3.814 x D: 3.578 inch; Weight: 0.4 lbs / 181g
WPS-12™ Power Supply (Included): Dimension: H: 1.19 x W: 1.85 x D: 4.65 inch; Weight: 0.5 lbs / 236g; Input: 100 to 240VAC, 47-63Hz, 1.45A Max; Output: 30VDC, 2A Max; Output Connector: 5.5mm x 2.5mm DC Barrel
Warranty (Length/Type): 3 Years

Extension kit 574896 kb - Data Sheet

Project List

ISE 2024: New Product: RCU2E™

Project List

New Product Intro: RemoteCamUSB2E™

Project List

Find a Dealer

Find a Distributor