This module, when paired with an existing or new RC4-CETM module, extends supported RS232 cameras up to 100M over a single CAT cable. RS232 control, camera power, and HDMI are provided over SCTLink™. The RC-SDA4+™ converts video and digital or analog audio to USB3 for soft-codec applications, and also converts computer PTZ camera commands (UVC) to RS232 for camera control. Dual video output paths from the video source are provided (DA), as well as 2 independent RS232 control inputs to the connected camera.
- Converts HDMI video and audio to USB 3.0.
- Translates UVC PTZ Control commands to native Poly or VISCA commands.
- Translates VISCA PTZ Control commands to native Poly commands.
- Adds BYOD support to traditional camera/codec systems.
- Supports Poly camera stand-alone installations.
- Simple Plug & Play installation.
- Integrated 1x2 HDMI Distribution Amplifier.
- Integrated RS232 Port to enable camera control via third party control systems.
- Field-upgradable firmware via microSD Card.
- In high security environments, the microSD Card slot can be permanently disabled.
- 8 position Dip Switch for configuration flexibility.
