Computer Components & Storage : Computer Boards & Cards : SIIG - SC-SA4R12-S2

4-channel High-speed PCI-to-Serial ATA RAID Controller Card

Model: SC-SA4R12-S2

Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping) for performance and reliability
Thin, flexible Serial ATA cables make it easier to route inside a PC
Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives
Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

SIIG’s Serial ATA 4-Channel RAID host adapter is an ideal solution for expanding your SATA storage capacity to your desktop computer. It is designed to add four SATA channels for connecting up to four additional SATA hard disk drives. This Serial ATA RAID host adapter can be configured as a standard 4 channel host controller or with RAID 0 (striping), RAID 1 (mirroring) or RAID 10 (mirror + striping) for performance, reliability or both respectively. Additionally, it can be used as a boot or secondary controller and will co-exist with most existing on-board Ultra ATA controllers.

Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping) for performance and reliability
Thin, flexible Serial ATA cables make it easier to route inside a PC
Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives
Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included
Two “Y” split power cables are also included to provide extra power connection
Chipset: Silicon Image SiI3114
Port type: Four Serial ATA ports
Slot type: 32-bit PCI
Compliant with Serial ATA Specification, revision 1.0
Compliant with PCI Specification, revision 2.2
Supports 48-bit LBA and verified to work with up to 4TB drives
Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping)
Coexists with Ultra ATA controller and allows you to connect up to four Serial ATA drives
Features independent 256-byte FIFOs per channel for host reads and writes
Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
Supports 32-bit wide PCI bus at 66MHz
Supports data transfer rates up to 150 MB/s (1.5Gb/s)
Requirements
- Pentium or equivalent PC with one available PCI slot
- Windows® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000
Package Contents
- Serial ATA 4-channel RAID
- 4 Serial ATA data cables
- 2 Dual-connector SATA power cables
- 2 "Y" split power cables
- Driver and utility software CD
- Installation guide

Computer Board/Card Type - Audio
Computer Board/Card Type - Network
Computer Board/Card Type - Video
ROHS Compliant - Yes
Warranty - Yes

External Ports: 4
Warranty (Length/Type): Lifetime Limited
Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
Certifications: FCC, CE

Card 781 kb - Other

Project List

Find a Dealer

Suggested Products

Matrox C420 Quad-Output Graphics Card

by Matrox Video

Intel® Xeon® processor based PICMG 1.3 SHB Single Computer Board

by Datapath Ltd.

Intel® Core™ i7 and i5 Processor Single Computer Board

by Datapath Ltd.