Computer Components & Storage : Computer Boards & Cards : SIIG - SC-SA0T11-S1

PCI Express SATA 6Gbps Adapter Card with SSD Socket

Model: SC-SA0T11-S1

Built-in socket for a 2.5” SATA SSD for space saving and superior drive performance
Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost
Note: HyperDuo automatic storage tiering is only compatible with Windows XP, Vista, 7 and 8. This feature is not fully supported in the Server OSes
Hardware RAID (RAID 0, 1 & 10) to offload the host CPU for max performance
Supports Port Multiplier FIS-based and Native Command Queuing (NCQ)
Note: Only one Port Multiplier is supported at any one time. Supports up to 4 drives connected via Port Multiplier plus 3 single drives for 7 drives total
Supports TRIM to extend the life of SSDs for maximum durability

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

SIIG’s SATA 6Gb/s 3i+1 SSD Hybrid PCIe adds 3 internal SATA 6Gb/s channels and 1 SATA SSD socket to your PCIe-equipped system. It is embedded with the fully-automated HyperDuo technology to enable SSD performance at 1/3 of the cost to work flawlessly with the leading 6Gb/s HDDs. This cost-effective hardware RAID (RAID 0, 1, 10) SATA host controller significantly enhances system performance by the capability of SSD acceleration to reduce system boot-up time and allows data to be stored on the high capacity of HDD data storage for cost saving.

Built-in socket for a 2.5” SATA SSD for space saving and superior drive performance
Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost
Note: HyperDuo automatic storage tiering is only compatible with Windows XP, Vista, 7 and 8. This feature is not fully supported in the Server OSes
Hardware RAID (RAID 0, 1 & 10) to offload the host CPU for max performance
Supports Port Multiplier FIS-based and Native Command Queuing (NCQ)
Note: Only one Port Multiplier is supported at any one time. Supports up to 4 drives connected via Port Multiplier plus 3 single drives for 7 drives total
Supports TRIM to extend the life of SSDs for maximum durability
HyperDuo mode supports Safe mode and Capacity mode
48-bit LBA mode with support up to 4TB hard disk capacity
Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s and 1.5Gb/s HDDs
Chipset: Marvell 88SE9230
Compliant with Serial ATA specification, Revision 3.0
Compliant with PCI Express Base specification, Revision 2.0
Supports 6Gb/s data transfer rate
Supports hardware RAID (RAID 0, 1, 10)
Input Interface: x2 PCI Express Generation 2
Output Interface: SATA
Connector:
- 3x 7-pin, SATA, Output
- 1x SSD Socket, 15+7-pin, SATA, Output
Requirements
- Desktop PC with an available x2, x4, x8 or x16 PCIe slot
- Windows® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2
Package Contents
- SATA 6Gb/s 3i+1 SSD Hybrid PCIe
- SATA data cables (2)
- Screws (4)
- Driver/software CD
- Installation guide

Computer Board/Card Type - Audio
Computer Board/Card Type - Network
Computer Board/Card Type - Video
ROHS Compliant - Yes
Warranty - Yes

Operating Temperature (Maximum): 122 F
Operating Temperature (Minimum): 32 F
Number of Channels: 3
Product Weight: 0.17 lbs
Warranty (Length/Type): 5 Years Limited
Certifications: FCC, CE
Depth: 4.72 in
Height: 0.79 in
Width: 5.83 in

Card 644 kb - Other

Project List

Find a Dealer

Suggested Products

Intel® Core™ 2 Quad Processor Single Computer Board

by Datapath Ltd.

Matrox C680 Six-Output Graphics Card

by Matrox Video

Intel® Xeon® processor based PICMG 1.3 SHB Single Computer Board

by Datapath Ltd.