Signal Processing Systems : Converters : Ross Video - ADC-8732B-C (-SC)

4-channel openGear Analog Composite to SDI Converter

Model: ADC-8732B-C (-SC)

7.8W power
Freeze modes
Proc amp controls
12-bit A to D conversion
10-bit decoding with 3-line/5-line/3D adaptive comb filters

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The ADC-8732B-C (-SC) is 10-bit broadcast quality video decoder with 12-bit analog to digital converter supporting 4 channels of analog audio embedding. It is specifically designed for broadcast or production situations in which an analog PAL-B, PAL-M, PAL-N, or NTSC composite signal must be converted to a component SD SDI signal. 4 SD SDI outputs with embedded audio are provided. Analog audio is converted at 24-bit resolution and offers adjustable ±10dBu of gain and delay up to 5 seconds.

7.8W power
Freeze modes
Proc amp controls
12-bit A to D conversion
10-bit decoding with 3-line/5-line/3D adaptive comb filters
4 channels of analog audio A/D with embedding
Optional frame synchronization
Horizontal and vertical timing adjustments
Programmable vertical interval blanking
24-bit audio ADC resolution, adjustable gain and delay
Status indicator LEDs on card-edge
Choice of reference inputs
5-year transferable warranty

Converter Signal Types - Video
Converter Type - Analog to Digital Converter
Warranty - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Input Signal Types: Analog Composite
Number of Channels: 4
Output (Converted) Signal Type: SDI
Active Power: 7.80 Watt
Regulatory Compliance: FCC
Warranty (Length/Type): 5 Years
Signal Standards Accepted: NTSC, PAL-B, PAL-M, PAL-N
Number of Composite Video Inputs: 1
Composite Video: 1 Vp-p (Nominal)
Composite Video Input Impedance: 75 ohm s (terminating)
Composite Video Return Loss: >50dB to 6.75MHz
Composite Video Common Mode Rejection: >58 dB (50/60Hz)
Signal Standards: SMPTE 259M-C, 270Mbps 525/625 lines, 10 bits
Number of Component SDI Outputs: Full Rear Module: 7, Split Rear Module: 3
Component SDI Output Return Loss: >20dB to 270MHz
Component SDI Output Signal Level: 800mV ±10 %

ADC-8732B (-S) - openGear Analog Composite to SDI Converter

ADC-8733A (-S) - openGear Analog Component to SDI Video Converter

ADC-8733A-C (-SC) - 4-channel openGear Analog Component to SDI Video Converter

Converter 1976 kb - Other

Project List

Find a Dealer

Suggested Products

12G-SDI to HDMI 2.0 Conversion with Fiber Transceiver

by AJA Video

12G-SDI to HDMI 2.0 Conversion with Fiber Receiver

by AJA Video

4K, compact, plug-and-play HDMI to NDI converter with loop-through

by Magewell Electronics