Signal Processing Systems : Audio Interfaces : RDL, Radio Design Labs - RU-NFD

Find a Distributor

Network to Format-A Interface/Distributor

Series: RACK-UP

Model: RU-NFD

Converts four dante network audio signals to RDL format-A and aux
Easy installation with format-A connections on RJ45 through CATx cable
Three dante audio signals feed format-A output pairs A, B and C
Fourth dante audio signal feeds auxiliary balanced +4 dBu line output
Format-A pairs are distributed to three separate format-A output jacks

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.

APPLICATION: The RU-NFD is an RDL Format-A sender/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.

One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.

The Format-A output is distributed to three separate rear-panel RJ45 jacks. Each Format-A output jack provides up to 200 mA of power to connected Format-A receivers. Multiple receivers may be daisy chained from one output jack, or may be connected by home run to each of the three outputs. Higher current Format-A receivers, such as RDL D-PSP1A powered Decora-style speakers, are to be individually connected to a separate output jack.

The RU-NFD output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates, or feeding other equipment using rack-mounted, shelf-mounted or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL’s renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A receiver may be connected near the RU-NFD or up to several thousand feet distant.

Converts four dante network audio signals to RDL format-A and aux
Easy installation with format-A connections on RJ45 through CATx cable
Three dante audio signals feed format-A output pairs A, B and C
Fourth dante audio signal feeds auxiliary balanced +4 dBu line output
Format-A pairs are distributed to three separate format-A output jacks
Signal LEDs indicate audio for each of the four received network signal channels
High resolution 24 bit digital to analog conversion
Legendary RDL analog filtering enhances superb audio performance
Powers remote format-A receivers through primary output jack
External 24 Vdc supply powers format-A receivers through all output jacks
LED indicators show network sync status
Outputs mute when digital audio inputs are inactive
Normal or hot-standby operation from PoE (Model RU-NFDP)
Compatible with wide array of RDL format-A active and passive receivers
Equipped for rack mounting or surface mounting

Audio Interface Type - Ethernet Audio
Dante Enabled - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: CE
DC Voltage: 24 Volts
Depth: 5.20 in
Height: 1.70 in
Shipping Depth (with packaging): 6 in
Shipping Height (with packaging): 2.63 in
Shipping Width (with packaging): 6 in
Width: 5.80 in
Product Weight: 1.35 lbs
Shipping Weight: 1.61 lbs
Network Connector: RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol: Dante
Transmission Rate: 100 Mbps
Sample Rates supported: 44.1 kHz, 48 kHz (default)
Bit Depth Supported: 24 bits
Audio Operating Levels: -18 dBFS = +4 dBu
Format-A Outputs:
- Format-A Outputs: Format-A Outputs RDL Format-A RJ45 (3)
- Format-A Signal Pairs Used (3): A, B, C (each Format-A output)
- Frequency Response: 20 Hz to 20 kHz (± 0.75 dB)
- THD+N: < 0.1%
- Noise below +4 dBu: < -85 dB (pair active); < -100 dB (pair muted)
- Crosstalk: < 80 dB (20 Hz to 20 kHz)
- Headroom above +4 dBu: > 18 dB
Aux Output:
- Output: Balanced, detachable terminal block
- Output Level: +4 dBu (nominal)
- Output Impedance: 150 ohms balanced; 75 ohms unbalanced
- Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
- THD+N: < 0.1%
- Noise below +4 dBu: < -75 dB
- Crosstalk: < 80 dB (20 Hz to 20 kHz)
- Headroom above +4 dBu: > 18 dB
Indicators (12): Power In (1); Power Out (3); Audio Signal LEDs (4), Network Sys and Sync (2), Ethernet Link and Speed (2)
Power Connections (2): Power Jack; Detachable Terminal Block
Power Requirement: 24 Vdc @ 120 mA plus connected loads
Package Type: Cardboard Box
Tariff code: 8517.18.0050

AV-LN4 - Line Level Audio to Network Interface

AV-NH1 - Network to Stereo Headphone Amplifier

AV-NL2 - Network to Audio Interface

AV-NL4 - Network to Audio Interface

AV-XMN4 - Microphone to Network Interface

D-HA1A - Format-A Stereo Headphone Amplifier

D-TPA1A - D-TPA1A 3.5 W Audio Power Amplifier

D-TPR1A - Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output

D-TPR2A - Active Two-Pair Receiver - Twisted Pair Format-A - Stereo Phono jack Outputs

D-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo phono outputs

D-TPRX3A - 3-input Format-A Source Selector

DB-HA1A - Format-A Stereo Headphone Amplifier with Decora Design

DB-TPA1A - DB-TPA1A 3.5 W Audio Power Amplifier

DB-TPR1A - DB-TPR1A Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

DB-TPR2A - DB-TPR2A Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

DB-TPR3A - DB-TPR3A Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

DB-TPRX3A - 3-input Format-A Source Selector, Custom Text, Black

DB-TPS3A - DB-TPS3A Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA inputs

DD-BN22 - Wall-mounted Bi-directional Mic/Line Dante Network Interface

DD-BN2M - Wall-mounted Bi-directional Mic/Line Dante Audio Interface

DD-BN2ML - Wall-mounted Dante Audio Network Interface

DD-BN31 - 4x4 Wall-mounted Dante Audio Network Interface

DD-BN40 - 4x2 Wall-mounted Dante Audio Network Interface

DD-BTN44 - Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDB-BN22 - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2M - 2x2 Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN2ML - Wall-mounted Bi-Directional Mic/Line Dante Interface

DDB-BN31 - 4x4 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BN40 - 4x2 Wall-mounted Bi-directional Mic/Line Dante Interface

DDB-BTN44 - Mini-Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DDS-BN22 - 2x2 Wall-mounted Dante Audio Network Interface

DDS-BN2M - 2x2 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN2ML - 100Mbps Wall-mounted Dante Audio Network Interface

DDS-BN31 - 4x4 24-bit Wall-mounted Dante Audio Network Interface

DDS-BN40 - 4x2 24-bit Wall-mounted Dante Audio Network Interface

DDS-BTN44 - RCA Jack Wall-Mounted Bi-Directional Line-Level and Bluetooth Audio Dante Interface

DS-HA1A - Format-A Stereo Headphone Amplifier with User Level Control

DS-TPA1A - DS-TPA1A 3.5 W Audio Power Amplifier

DS-TPR1A - Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR mic/line output

DS-TPR2A - Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - stereo phono jack outputs

DS-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo phono out

FP-NML2 - Network to Mic/Line Interface

FP-NML2P - Network to Mic/Line Interface with PoE

FP-NML2V - Network to Mic/Line Interface with VCA

FP-NML2VP - Network to Mic/Line Interface with VCA, PoE

HR-RU1 - Mounting Adapter Kit for a RACK-UP Module

RU-BNF - Format-A Bi-directional Network Interface

RU-BNFP - Format-A Bi-directional Network Interface with PoE

RU-FN - Format-A to Network Interface

RU-FNP - Format-A to Network Interface with PoE

RU-HRA1 - RU-HRA1 10.4" Rack Mount for 1 RACK-UP Series Product

RU-LB2 - Line-level Bi-directional Network Interface

RU-LB2P - Line-level Bi-directional Network Interface with PoE

RU-LB4 - Line-level Bi-directional Network Interface

RU-LB4P - Line-level Bi-directional Network Interface with PoE

RU-MLB2 - Mic/Line Bi-directional Network Interface

RU-MLB2P - Mic/Line Bi-directional Network Interface with PoE

RU-MLB4 - Mic/Line Bi-directional Network Interface

RU-MLB4P - Mic/Line Bi-directional Network Interface with PoE

RU-NFDP - Network to Format-A Interface/Distributor with PoE

RU-NL2 - Network to Line Level Interface

RU-NL2P - Network to Line Level Interface with PoE

RU-NL4 - Network to Line Level Interface

RU-NL4P - Network to Line Level Interface with PoE

RU-TPDA - Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

RU-TPS4A - Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

RU-VCA6A - RU-VCA6ADigitally Controlled Attenuators

SF-BNC2 - Bidirectional Unbalanced Stereo Audio Network Interface

SF-DN4 - Digital Audio to Network Interface

SF-ND2 - Network to Digital Audio Interface

SF-NH1 - Network to Stereo Headphone Amplifier

SF-NL2 - Network to Audio Interface

SF-NP35E - PoE++ Network to 35W Mono Audio Amplifier - 70V or 100V

SF-NP40D - 40W Network to Stereo Power Amplifier

SF-NP50A - Network to 50W Mono Audio Amplifier - 70V or 100V

SF-UN1 - USB to Dante Network Interface

SF-XMN4 - Microphone to Network Interface

ST-LEQ1 - Loudness Equalizer - Use with VCA

ST-VCA3 - Voltage Controlled Amplifier

TP-HA1A - TP-HA1A Format-A Stereo Headphone Amplifier

TX-TPR1A - Active Single-Pair Receiver

TX-TPR3A - Active Three-Pair Receiver - Twisted Pair Format-A - balanced line outputs

TX-TPR6A - Passive Single-Pair Receiver, Twisted Pair Format-A

RDL_Format-a_Dante_Intro.pdf 1713 kb - Other

Project List

RDL_Dante_Intro.pdf 3030 kb - Other

Project List

Interface 1138 kb - Data Sheet

Project List

DRA-35R
RACK-UP DIN Rail Adapter

RU-SMA1
RACK-UP Mounting Plate - mounts any RACK-UP module in a cabinet or other flat surface

Find a Dealer

Find a Distributor

Suggested Products

IP audio converter and capture device with AES67, NDI® and SRT support

by Magewell Electronics

IP audio converter and capture device with Dante, NDI® and SRT support

by Magewell Electronics

Option Card, GPIO, 8 I/O, 9 Pin D-SUB

by IHSE USA, LLC