HDMI 2.0 Ultra HD Handheld Video Generator/Analyzer Test Instrument

Model: 780BH

Battery powered for portability
Device is powered via internal batteries or externally via an AC charger
Video pattern testing
Test a display's HDMI and analog component inputs with all the necessary standard timings to ensure that it can render video test patterns including deep color and HDMI 3D patterns
Over 25 video patterns supported. Add custom bitmaps. Create your own custom formats. Scroll bitmap patterns to test for motion artifacts

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 780B/BH Video Generator/Analyers are battery-powered, portable video test instrument that enable you to conduct quick, on-site verification testing and troubleshooting of your HDMI system and analog video displays. The 780BH supports all the features of the 780A including 300MHz on the HDMI Rx and Rx ports for testing of 4K Ultra HD HDMI 2.0 devices at 50/60Hz, but adds a larger screen (7 inches) for greater convenience in viewing analysis test results as well as a status bar on the bottom of the display for at-a-glance status on the HDMI Tx and Rx ports. Now supports testing of HDMI 2.0 devices including tests for 4:2:0 pixel encoding on sources and sinks, EDID emulation for testing HDMI 2.0 sources and distribution devices and tests HDMI 2.0 sinks with 21:9 formats. NEW! New Model 780BH model supports HDCP 2.2 testing for HDMI 2.0 4K sources and sinks. Automated EDID test option enables automated testing of source devices' handling of a variety of EDIDs.

Battery powered for portability
- Device is powered via internal batteries or externally via an AC charger
Video pattern testing
- Test a display's HDMI and analog component inputs with all the necessary standard timings to ensure that it can render video test patterns including deep color and HDMI 3D patterns
- Over 25 video patterns supported. Add custom bitmaps. Create your own custom formats. Scroll bitmap patterns to test for motion artifacts
HDMI audio testing
- Send audio patterns, tones & noise through HDMI, SPDIF or Optical digital audio outputs including over HDMI 1.4 ARC channel for 780B
- Program audio parameters such as sampling rate, bit depth and channels. Use a variety of audio formats including LPCM, Dolby, DTS and high bit rate audio formats such as Dolby TrueHD and DTS Master Audio.
HDMI analyzer for sources
- Emulate a known-good HDMI sink device to analyze HDMI video and audio content from an HDMI source device with HDCP content protection
- View the incoming video images and metadata from an HDMI source device on the LCD display even when content is protected with HDCP
Installer Test Utility
- Quickly diagnose HDMI interoperability problems through an automated and simplified interface
- Run tests upstream toward the source, downstream toward the sink or test both upstream and downstream simultaneously with the "Link" test
- The utility also enables you to test on both sides of a repeater
Verify HDCP on repeaters and displays
- Send HDCP 1.4 and 2.2 authentication transactions and encrypted video content to a downstream repeater (e.g. AVR) and/or sink (e.g. HDTV)
- Check the authentication response from the sink.
Check Max HDCP HDMI devices
- Check the number of HDCP devices an HDMI source supports during HDCP authentication. Verify HDCP 1.4 and 2.2 authentication from and HDMI source
Verify video timing
- Verify the timing of an HDMI source. Compare against a known-good timing
Verify video type
- Verify the video type of an HDMI source. View AVI info frame content
Identify EDID problems
- Run verification tests on the EDID of a sink device such as an HDTV or input of a repeater device. View the entire contents of the EDID of the sink device
- Run portions of the EDID compliance test. Compare two EDIDS
Verify an HDMI source's response to an EDID
- Emulate the EDID of any HDMI sink device to verify that an HDMI source device responds properly to it. Store and retrieve multiple EDIDs for use in testing
Verify audio data
- Read the audio info frames and audio sample packet headers including channel status bits from a connected HDMI source

Tester Format - Standalone Component (Box)
Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Input Signal Types: HDMI
Output Signal Types: HDMI
AC Voltage (Maximum): 120 Volts
AC Voltage (Minimum): 110 Volts
Depth: 6 in
Height: 2.70 in
Width: 0.38 in
Product Weight: 3.25 lbs
Regulatory Compliance: HDCP

Video Generator/Analyzer 421 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

4K HDMI Tester

by Vanco International

System Maintenance and Diagnostics

by Crestron Electronics, Inc.

LED Tester

by Network Technologies Inc (NTI)