Audio Production Equipment : Audio Processors : Q-SYS - DPM 300/300H

Digital Processor/Monitor/Crossover

Series: DPM

Model: DPM 300/300H

Ten digital inputs for 5.1 and 7.1 soundtracks and HI/VI
HDMI input/output for non-sync sources (DPM 300H)
Dolby Digital Plus™ and DTS-HD® (DPM 300H)
Control and monitoring via Ethernet including full SNMP support
Serial automation control via RS-232

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The DPM builds on the legacy of QSC’s DCM and DCP products to provide all signal processing and monitoring functions for Digital Cinema in a single integrated system. Designed to be used with QSC’s Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC’s Digital Cinema Speakers (DCS), the DPM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DPM 300 is configurable for passive, bi-amp, tri-amp and quad-amp operation and 2 or 4 surround channels (5.1 or 7.1).

Ten digital inputs for 5.1 and 7.1 soundtracks and HI/VI
HDMI input/output for non-sync sources (DPM 300H)
Dolby Digital Plus™ and DTS-HD® (DPM 300H)
Control and monitoring via Ethernet including full SNMP support
Serial automation control via RS-232
Analog Inputs for film processors, non-sync and Mic/Line
Master volume and full 1/3 Octave Graphic EQ on all channels (except subwoofer)
Booth Monitor loudspeaker and headphone jack
Digital Loudspeaker Crossovers — three passive bi-, tri-, or quad-amp screen channels
Compatible with all existing DCA amplifiers — thousands of DCA-equipped screens are ready for full network monitoring and control
Bypass mode routes audio around failed components to insure that the show will go on
Intrinsic Correction™ for DCS loudspeakers for optimal “out of box” performance and reduced set-up time
Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates

Rackmountable - Yes
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Sampling Rate/Frequency: 96 kHz
Sampling Rate/Frequency: 96000 Hz
Sampling Rate/Frequency: 0 Ghz
Certifications: UL/CSA
Dynamic Range: 109 dB
Rack Units (Height): 2
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Depth: 15 in
Height: 3.50 in
Width: 19 in

Crossover 851169 kb - Data Sheet

Project List

Find a Dealer

Suggested Products

HDMI Audio Extractor with eARC and ARC

by Vanco International

Audio Delay Device

by Vanco International

8K eARC Audio Processor

by AVPro Edge