The TESTER-CCTVPOE-P Professional CCTV Tester with Power Over Ethernet (PoE) and IP Testing is a portable, multifunction tester for CCTV installations and maintenance. Power cameras and review the display without the hassle of running between the camera and a DVR located in a separate area. Test options include: audio, video, ping, TDR, PoE, IP network connections, and LAN (local area network) cable connections.
For more information, visit http://www.montest.com/cctv-tester/tester-cctv-poe-104.html
- 3.5" TFT-LCD with 480x320 resolution and up to 10x zoom.
- Automatically adapts and displays NTSC or PAL video – generates the PAL/NTSC multi-system color bar for video testing and calibration.
- Compact, hand-held size for easy operation.
- Video level testing: video signals measured in IRE or mV.
- 12V DC, 1A power output for cameras.
- Audio input testing.
- Check IP address and Ethernet connection of the connected device.
- Record and store images and video files.
- PTZ (Pan-Tilt-Zoom) control: Pan, tilt and zoom. Adjust focus and aperture. Configure and activate preset position. Supports more than twenty PTZ protocols. Scans PTZ camera ID.
- Generates eight forms of PAL/NTSC color bar patterns.
- Test LAN or telephone cables for connection status.
- Displays wire sequence and serial number of cable tester.
- Supports RS232, RS485 and RS422. Captures and displays RS485 data for troubleshooting. Baud rate: 600 to 115200 bps.
- Tests the PoE voltage when a POE switch is supplying power to the IP camera. Displays the power+ and power- on the ethernet cable pins, each cable pin’s voltage and the failure connection of cable pin series numbers. Easily locate the connected port on the PoE switch by activating device port flicker.
- TDR cable testing accurately measures BNC, Ethernet, and serial cable break-point and short-circuit locations.
- USB-rechargeable Lithium-ion polymer battery.
