hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Network Technologies Inc (NTI) - SPLITMUX-HD-4LC
Request Quote
network-technologies-nti

Low-Cost HDMI Quad Screen Splitter/Multiviewer

Series: SPLITMUX®

Model: SPLITMUX-HD-4LC

  • Quad, Dual, Picture in Picture, and Full Screen display modes.
  • Supports HDTV resolutions to 1080p:
  • HDMI features supported: 10-, 12-, and 16-bit xvYCC, RGB, and YCbCr. Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS, LPCM 7.1, and LPCM 2. Bandwidth up to 340 MHz (8 Gbps). Lip Sync.
  • HDCP compliant.
  • Seamlessly scan between up to four sources at set intervals.
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Accessories

The SPLITMUX® Low-Cost HDMI Quad Screen Splitter/Multiviewer allows you to simultaneously display real-time HDMI video from four different sources on a single monitor. It is capable of displaying the video sources in quad, dual, PiP or full screen mode.

For more information, visit http://www.networktechinc.com/hdmi-quad-screen.html

  • Quad, Dual, Picture in Picture, and Full Screen display modes.
  • Supports HDTV resolutions to 1080p:
  • HDMI features supported: 10-, 12-, and 16-bit xvYCC, RGB, and YCbCr. Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS, LPCM 7.1, and LPCM 2. Bandwidth up to 340 MHz (8 Gbps). Lip Sync.
  • HDCP compliant.
  • Seamlessly scan between up to four sources at set intervals.
  • Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants.
  • Switch audio independently of video from connected HDMI sources (e.g. source 1 and source 2 video are active while only source 3 audio is active).
  • Any DVI source can be connected by using the DVI-HD-xx-MM cable (not included).
  • Control the multiviewer through front panel buttons, IR remote or RS232
  • Built-in EDID table
 
Request Quote