4K 18Gbps HDMI Video Matrix Switch, 16x16, 1RU

• Matrix Switcher Video Input Type - HD/HDMI
• Rackmountable - Yes
• Supported Resolution - 4K (4096x2400)
• Warranty - Yes
• Spec Sheet available - Yes
• Spec Sheet available - Yes

• Operating Temperature (Maximum): 104 F
• Operating Temperature (Minimum): 32 F
• Bandwidth: 600000 kHz
• Bandwidth: 600000000 Hz
• Certifications: CE, RoHS
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Depth: 14.56 in
• Height: 1.75 in
• Width: 19 in
• Regulatory Compliance: TAA compliant
• Warranty (Length/Type): Two years
• Video Input: 16 female HDMI input connectors. Compatible with computers and UHD video sources (satellite receivers, Blu-Ray players, etc) with HDMI video. Supports HDCP 2.2/1.4 Multiplatform support: Windows 7/8/10, Windows Server 2008/2012/2016/2019, Solaris, Linux, FreeBSD, and MAC OS 10/11.
• Video Output: 16 female HDMI output connectors. Supports resolutions up to Ultra-HD 4Kx2K (3840x2160 and 4096x2160 @24/30/60Hz YUV 4:4:4). Supports HDCP 2.2/1.4 Max data rate: 18Gbps
• Protocols: HTTP, HTTPS. TCP/IP, DHCP, UDP, ARP, TLS v1.2. IPV4.
• Power: Input: 100 to 240 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.). Power consumption: 150W max.
• Storage Temperature: -20 to 140°F (-30 to 60°C).
• Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
• Dimensions: WxDxH (in): With cable management tray: 19x18.36x1.75 in (483x466x44 mm).
• Cables: Interface cables between the video sources/displays and the switch are required for proper operation. Supports cable lengths to 20 feet for 4Kx2K resolutions at 60Hz and lengths to 50 feet for 1080p at 60Hz using passive HDMI cables. Cables longer than 50 feet can be used provided they have a built-in video equalizer (also known as "active HDMI cables"). Use HD-xx-MM HDMI cables to connect an HDMI source or display. HD-3/6/10/15/20-MM supports resolutions to 4K@60Hz. HD-30/50/75/100-MM supports resolutions to 1080p@60Hz. HD-75/100-MM have a built-in digital video equalizer for extending HD signals up to 1080p at 60Hz. These cables are directional, with one plug end marked for the display. Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet. HD-ACT-20/25/30/40/50/60-MM supports resolutions to 4K@60Hz (18 Gbps). HD-ACT-75/100-MM supports resolutions to 4K@30Hz (10.2 Gbps). Use DP-HD-xx-MM cables to connect a DisplayPort source up to 15 feet away from the switch. Supports resolutions up to 4k@30hz 4:4:4 and 4K@60Hz 4:2:0. Cables not included.
• Ethernet Control Method: Standard control method. Configuration can be done over the Internet via Web server or Telnet. Female RJ45 connector. 10/100 BaseT Ethernet interface. Web Server: Security is ensured by password and user configurable timeout. Up to 25 users can access the web page at one time. The user can access the following pages: Switch page: allows the user to connect any input to any output, save and recall up to ten connections. Administration pages: administrator can access pages for system configuration, network configuration, naming video inputs/outputs, scanning sequence, DDC options, changing password, and updating firmware. Standby Mode page: allows the user to quickly place the switch in standby mode. Support page: provides links to the product manual and firmware downloads webpage. Reboot page: allows the user to quickly reboot the switch. Telnet: Security is ensured by password. Up to 25 users can access the telnet connection at one time. Commands are similar to RS232 commands. The telnet server listens on ports 2000 and 2005. Port 2000 is for an operator telnet session. Port 2005 is intended for a software control type session using raw TCP communication.
• Front Panel Interface Control Method: Standard control method. Configuration and control can be done using the front panel buttons. Keypad allows selection of the input source to be routed to the desired outputs.
• RS232 Control Method: Standard control method. Configuration and control can be done through the serial port. Female RJ45 connector. Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232.
• Compatible NTI Products: Combine NTI's extenders, switches, splitters and cables for complex applications. 4K HDMI Extender via One CATx (ST-C64K-300). Supports resolutions up to 4k@30hz. 4K HDMI Active Optical Cable. (HD4K18GB-FO-xxM-MM). 4K@30Hz HDMI Active Cables with Built-In Signal Booster (HD-ACT-xx-MM). DisplayPort to HDMI Interface Cables, Male to Male, 4K (DP-HD-xx-MM). Supports resolutions up to 4k@30hz 4:4:4 and 4K@60Hz 4:2:0.
• Infrared Remote Control (Optional): Optional control method. IRT-UNV is sold separately. Standard control method Transmitter can be up to 30 feet (9.1 meters) away. Control up to 15 switches with one remote. Power: Two AAA batteries (included).

HD-10-MM
HDMI Male-male cable - 10 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-15-MM
HDMI Male-male cable - 15 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-25-MM
HDMI Male-male cable - 25 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-30-MM
HDMI Male-male cable - 30 ft; Max Resolution: 1080p@120Hz

HD-3-MM
HDMI Male-male cable - 3 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

HD-6-MM
HDMI Male-male cable - 6 ft; Max Resolution: 4K@60Hz, 1080p@120Hz

IRT-UNV
Infrared Remote Control