hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
Network Technologies Inc (NTI) - E-IMDM
Request Quote
network-technologies-nti

Adaptive Dual Microwave/PIR Motion Detector

Model: E-IMDM

  • Registers movement in area covered: 30x35 ft (9.1x10.6 m)
  • Dual technology microwave and PIR signal verification – combines the strengths of both heat- and motion-sensitive detection technologies to dually verify alarm conditions for ideal false alarm discrimination.
  • Condition display and setting feedback via LEDs.
  • Provides immunity from variation in ambient temperature, acoustic noise, EMI/RFI interference, and pets/animals.
  • 12 sensitivity modes - automatically adjusts to the environment.
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

Environment Monitoring System Motion Detection Sensors
Motion/Intrusion Sensors compatible with E-2D, E-5D and E-16D

For more information, visit http://www.networktechinc.com/motion-sensor.html

  • Registers movement in area covered: 30x35 ft (9.1x10.6 m)
  • Dual technology microwave and PIR signal verification – combines the strengths of both heat- and motion-sensitive detection technologies to dually verify alarm conditions for ideal false alarm discrimination.
  • Condition display and setting feedback via LEDs.
  • Provides immunity from variation in ambient temperature, acoustic noise, EMI/RFI interference, and pets/animals.
  • 12 sensitivity modes - automatically adjusts to the environment.
  • Mounting: Wall or corner, 6 to 10 feet (1.8 to 3 meters).
  • Tamper switch opens when cover is removed.
  • Screw terminal. Connect to digital input or RJ45 sensor ports on an ENVIROMUX system. To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal. To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
  • Current consumption: 35mA @ 12VDC (max)
  • Powered by E-2D/5D/16D.
 
Request Quote