Graphic equalizer is one of the finest graphic equalizers. This unit was developed using the expertise of professional sound engineers and working musicians. It has superior performance and greater flexibility than any other equalizers. Compact and durable all-steel chassis design, it provides optimum audio control for all live and recording applications, plus ultimate operating convenience and maximum reliability.
2 Channel, Single Rack Space, 15—2/3rd Octave Bands Each Channel
Active balanced (XLR and 1/4” TRS) and unbalanced (RCA) input/output connectors
Constant Q bandwidth from each filter with 3% center frequency accuracy
Parallel filter design for minimal phase distortion
Ultra low-noise circuitry
Selectable range, 6dB or 12dB gain
Center detents on faders
Variable level control
Power off automatic bypass function
Equalizer ON/OFF bypass switch
Peak (overload threshold) LED
Shielded internal power supply with AC input and selectable line voltage (115V/60Hz or 230V/50Hz)
Ground lift switch
Equalizer Type - Graphic Equalizer
Equalizer Input Connector - RCA
Equalizer Input Connector - XLR
Equalizer Output Connector - XLR
Warranty - Yes
Depth:
8.66 in
Height:
1.75 in
Width:
19 in
Product Weight:
6.16 lbs
Warranty (Length/Type):
1 Year
Equalizer Control Bands:
2 X 15, 2/3 Octave ISO spacing from 25Hz to 16kHz
Equalizer Filter Type:
Constant Q
Equalizer Level Control Range:
+/-6 or +/-12 dB (Selectable)
Input Type:
Active Balanced/Unbalanced
Input Impedance Balanced:
20 kiloohms
Input Impedance Unbalanced:
15 kiloohms
Input Maximum Level:
+/-18 dBV
Output Type:
Active Balanced/Unbalanced
Output Impedance Typically:
<600 ohms
Output Maximum Level:
+/-16 dBV
Output Clip LED Threshold:
5 dB (Below Clipping)
Output Low Cut Filter:
40Hz, 12dB/octave
Output Frequency Response:
20Hz to 20KHz (+/- 1dB)
Output THD + Noise:
<0.002 % (@ 1kHz, all faders at mid position)
Output Signal to Noise Ratio:
93 dB (@ 1KHz)
Output Channel Separation:
60 dB (1kHz)
Output Line Voltage:
100 to 130Vac, 50/60Hz and 200 to 240Vac, 50Hz