VHF wireless microphone system for camcorders. Rugged 151 VR receiver can be camera-mounted or worn as bodypack (with removable belt clip). Easy hook-up to camcorder with supplied connecting cable. 120dB dynamic range with no background hiss or overload distortion. LED lights indicate low battery and receiver signal. Convenient operation with output level and mute adjusts, separate 3.5mm audio output and monitor headphone mini jacks, headphone volume thumbwheel control with integrated unit off/on switch. Detachable software antenna extends from top of receiver. Operates on a separate single frequency in the VHF 170 to 216MHz band. Low-battery LED indicator flashes once for unit on, lights steady for low-battery alert. Off/standby/on switch allows convenient audio muting. Uses one 9V alkaline battery for 15+hours operation. Locking 3.5mm mini-jack provides secure connection for removable microphone or instrument cable.
Easy hook-up to camcorder with supplied connecting cable
Powered by 9V alkaline battery
120dB dynamic range with no background hiss or overload distortion
LED lights indicate low battery and receiver signal
Detachable software antenna extends from top of receiver
Microphone Connectivity - Wireless
Frequency Response:
25Hz to 20kHz
Dynamic Range:
120 dB
Harmonic Distortion:
<0.3 %
RF Carrier Frequency:
One of four standard channels in the VHF high band
Frequency Stability:
±.005%, crystal controlled
Modulation:
FM, ±15kHz
Operating Range:
Up to 250ft (depending on site conditions)
Controls:
Headphone volume controls with unit off/on switch, mute adjust, audio output level adjust
Audio Output:
600ohms unbalanced
Connectors:
Audio/headset output, 3.5mm mini jack
LED Indicators:
Unit on (single flash), low battery alert (steady) TX on, low battery