The BT-1U-3 system incorporates digital encoding technology. This fiber-optic module transmits 1 channel of NTSC/PAL video (10 bit, 10MHz) over one fiber. This is single-mode fiber system.
The versatility of the BT-1U-3 system is improved by SpectraView, an on-screen-video-diagnostic/setup firmware system and SpectraSmart, an optional PC based network-diagnostic-system. SpectraView monitors the integrity of the fiber link. A break in the fiber path will cause a loss of fiber alarm to be displayed on an associated monitor. SpectraView is easy to use, always active and eliminates the need for additional test equipment. SpectraView includes a selectable on-board audio and data test signal generator with built-in local and remote loop-back functions. The BT-1U-3 product is fully compatible with Meridians PC based SpectraSmart network management and diagnostic software system. SpectraSmart supervises the operating parameters of the transmission system such as the status on video levels, sync, digital carrier detect, voltages, temperature and optical levels.
- Transmits 1 channels of NTSC/PAL video (10 bit, 10MHz standard) over one fiber
- 10 bit video digital encoding
- 10MHz video bandwidth
- 75 ohms BNC video connector (gold center pin)
- Wide optical dynamic range, eliminates need for optical attenuators
- Laser based systems for multi-mode and single-mode
- Surface mount technology (SMT) for high reliability and repeatability
- SpectraSmartTM network management compatible
- Local LED status indicators to monitor critical
- System diagnostics for performance parameters
- ST and FC optical connector
- Hot swappable cards
- Laser back, biased photo detector circuitry for stable optical output over full temperature range
