The RF Relay Module with SoftswitchR is a radio frequency (RF) device that uses LutronR patented SoftswitchR technology to control up to 16 A of general-purpose loads based on input from RadioRAR 2 and HomeWorksR QS systems.
Various operating voltages available refer to model number chart below for details on voltage requirements
Capable of switching 16 A of general-purpose loads
Utilizes LutronR Clear ConnectR RF Technology refer to model number chart below for frequency band data and LutronR system compatibility
Mounts to an electrical junction box through a 1/2 in or 21 mm trade-size knockout opening
Complies with requirements for use in a compartment handling environmental air (plenum) per NECR 2011 300.22(C)(3)
Warranty - Yes
Spec Sheet available - Yes
Transmission Range:
30 ft
Maximum Frequency Response (Bandwidth):
437000 kHz
Maximum Frequency Response (Bandwidth):
437000000 Hz
Minimum Frequency Response (Bandwidth):
431000 kHz
Minimum Frequency Response (Bandwidth):
431000000 Hz
AC Voltage (Maximum):
277 Volts
AC Voltage (Minimum):
120 Volts
Active Power:
16 Watt
Current Draw:
16 Amps
Depth:
1.25 in
Height:
3.94 in
Width:
2.82 in
Warranty (Length/Type):
1 Year Limited
Typical Power Consumption:
< 1.0 W
Typical power test conditions: all loads off, top LED on
Regulatory Approvals:
UL, UL 2043 Plenum Rated, FCC Approved. Complies with the limits for a Class B device, pursuant to Part 15 of the FCC rules: CSA, IC, NOM (LMJ- model)
Environment:
Ambient operating temperature: 32 °F to 131 °F (0 °C to 55 °C)
Ambient operating humidity: 0% to 90% humidity, non-condensing.
Indoor use only.
COMMUNICATIONS:
Operates using Clear ConnectR RF Technology for reliable wireless communication; refer to model number chart on page 1 for band frequency details. RF range is 30 ft (9 m) from repeaters. Contact Lutron for applications using foil-backed or metallic ceiling tiles.
Load:
Maximum load: 16 A general purpose. No minimum load requirements. Load types include, but are not limited to: Incandescent, MLV, ELV, Resistive, Inductive, Magnetic fluorescent, and Electronic fluorescent.
Surge Protection:
Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Mounting:
Mounts to an electrical junction box through a 1/2 in (21 mm) trade-size knockout opening.