Signal Routing / Switching : Switchers : Lightware - UMX-HDMI-140-Plus

UMX Series Switcher for VGA, DVI-I, HDMI and DisplayPort with Audio Embedding, and Cisco Room compatibility

HDMI1.4, VGA, DVI, DP1.1 + Ethernet + RS-232 + bidirectional IR standalone switcher with advanced control functions. HDCP, 3D & 4K / UHD support. Stereo local analog audio embedding, GPIO control port, command injection, Autoselect & priority modes.

Series: UMX

Model: UMX-HDMI-140-Plus

Part #: 91560003

Cisco VC room integration compatibility
Advanced control feature pack for 3rd party video conference collaboration
Digitizes VGA, YUV analog input formats and converts to HDMI or DVI
3,5mm audio jack input
1920x1080 at 120Hz/4:4:4, 4096x2048 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

UMX-HDMI-140-Plus ia a multiport VGA, DisplayPort, HDMI and DVI switch for universal 4K video and audio with an HDMI output. With the built-in Event Manager control feature it is the ultimate solution for huddle rooms and similar collaboration environments. This device was designed for digital and analog video and audio signals: VGA, YPrPb, DVI, HDMI 1.4 and DP 1.1 with analog stereo audio from local inputs or embedded 7.1 HDR audio.

Cisco VC room integration compatibility
Advanced control feature pack for 3rd party video conference collaboration
Digitizes VGA, YUV analog input formats and converts to HDMI or DVI
3,5mm audio jack input
1920x1080 at 120Hz/4:4:4, 4096x2048 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
Audio embedding (or replace original audio)
Adjustable analog audio settings (volume, gain, balance)
Frame Detector (analyze detailed video timings)
Compatible with Mac laptop and desktop computers with Thunderbolt port
5-pole Phoenix balanced analog audio connectors
Mounting options for rack, furniture or truss
External universal power adaptor
Twist-and-lock DC power connector
Supports several embedded audio formats (including PCM, Dolby Digital and DTS)
DVI-I (Analog+Digital) input connection
HDCP enable/disable function on input
HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
Multiple TCP/IP connections
Device control via Ethernet (TCP/IP) and RS-232
Advanced EDID Management
Intuitive control software for device configuration
GPIO control ports
Front panel buttons for crosspoint control
Supports HDMI 4K signal formats (4K UHD at 30Hz RGB 4:4:4 or at 60Hz YUV 4:2:0, up to 9 Gbps)
Command injection on RS-232 and IR ports
Autoselect modes to automatically switch video and audio (first detect, last detect, priority)
Built-in Event Manager automation feature
Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
Pixel Accurate Reclocking
No video compression
Bi-directional RS-232 extension (pass-through)
HDCP 1.4 compliant
Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
Firmware upgrade through Ethernet
Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
Built-in video test pattern generator
No signal latency, zero frame delay

Supported Resolution - Other
Switcher Connector Type - HDMI
Warranty - Yes
Spec Sheet available - Yes

Certifications: CE
Active Power: 8 Watt
Current Draw: 2 Amps
DC Voltage: 12 Volts
Depth: 3.95 in
Height: 1.02 in
Width: 8.70 in
Product Weight: 1.32 lbs
Warranty (Length/Type): 3 Year

Switcher 4080320 kb - Data Sheet

Project List

Find a Dealer