Signal Processing Systems : Extenders & Repeaters : Kramer - PT-2UT/R-KIT

USB 2.0 PoC Extender Kit over Extended–Reach CAT

Model: PT-2UT/R-KIT

Part #: 50-00015590

Comprehensive USB extender plug and play USB extender kit for providing extended-reach CAT signals and 2-way power over twisted pair copper infrastructures.
A local USB host is auto-connected to remote-connected USB devices employing either interrupt, bulk or isochronous USB 2.0 standard data transfer communication.
Flexible USB connectivity. Wide variety of USB peripheral devices can be extended including cameras, touch screens, smart boards, hard drives, game controllers, audio devices, printers, scanners or HID (Human Interface Devices) devices such as a mouse or
Dual role and OTG (On The Go ) devices such as smart phones and tablets, connected either to a transmitter-side USB host port or receiver-side USB device port, can communication with a remote host or peripheral pairing device.
Remote USB charging, Fast USB charging of peripheral devices when the receiver is powered by a power supply and standard USB charging when the receiver is powered by the transmitter via CAT.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

PT-2UT/R-KIT is a comprehensive, extended-reach CAT extender kit for USB 2.0, RS-232 and audio signals and 2-way powering over twisted pair. The PT-2UT transmitter converts the USB input signal into a CAT signal. The PT-2UR receiver converts the transmitted CAT signal into a USB signal.

Comprehensive USB extender plug and play USB extender kit for providing extended-reach CAT signals and 2-way power over twisted pair copper infrastructures.
A local USB host is auto-connected to remote-connected USB devices employing either interrupt, bulk or isochronous USB 2.0 standard data transfer communication.
Flexible USB connectivity. Wide variety of USB peripheral devices can be extended including cameras, touch screens, smart boards, hard drives, game controllers, audio devices, printers, scanners or HID (Human Interface Devices) devices such as a mouse or
Dual role and OTG (On The Go ) devices such as smart phones and tablets, connected either to a transmitter-side USB host port or receiver-side USB device port, can communication with a remote host or peripheral pairing device.
Remote USB charging, Fast USB charging of peripheral devices when the receiver is powered by a power supply and standard USB charging when the receiver is powered by the transmitter via CAT.
Bidirectional RS-232 Extension. Serial interface data flows in both directions, allowing data transmission and device control.
Audio extension send an audio signal from an audio source connected to the transmitter to an active audio playing device connected to the receiver.
Cost-effective maintenance Status LED indicators facilitate easy local maintenance and troubleshooting.
Easy installation, single twisted-pair cable for signal and power wiring. Compact PicoTOOLS® fan-less enclosure for device-back mounting or side-by-side mounting of 4 units in a 1U rack space with the recommended rack adapter.

Spec Sheet available - Yes

Inputs: 1 CAT: On an RJ-45 female connector for extension line (PT-2UR), 1 Stereo Analog Unbalanced Audio: On a 3.5 mm mini jack connector for audio extension (PT-2UT)
Outputs: 1 CAT: On an RJ-45 female connector for extension line (PT-2UT), 1 Stereo Analog Unbalanced Audio On a 3.5 mm mini jack connector for audio extension (PT–2UR)
Ports: 1 USB: On a USBB female connector for USB host extension (PT-2UT), 4 USB: On USBA female connectors for USB devices extension (PT-2UR), 1 RS-232: On a 3-pin terminal block connector for serial link extension
EXTENDED USB: Data Rate Up to 480 Mbps, transmitted data bandwidth Up to 300 Mbps, standards Compliance 1.1 and 2.0 USB
EXTENSION LINE: Reach using shielded UNIKAT cables: Up to 100 m (330 ft), Reach using CAT 5e cables: Up to 30 m (100 ft)
Extended RS-232: Baud Rate 9600
Current Draw: 2 Amps
DC Voltage: 12 Volts
Depth: 2.04 in
Height: 0.96 in
Shipping Depth (with packaging): 4.72 in
Shipping Height (with packaging): 3.43 in
Shipping Width (with packaging): 6.18 in
Width: 2.45 in
Product Weight: 0.50 lbs
Shipping Weight: 1.50 lbs

RK-4PT-B - 19" Rack Adapter for Pico TOOLS

Extender Kit 542822 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

Wirelessly Extends Stereo Analog and Subwoofer Audio Signals Up to 164ft (50m)

by Vanco International

ARC Digital Audio Extender

by Vanco International

Digital Audio Extender with eARC

by Vanco International