Signal Processing Systems : Decoders & Encoders : Kramer - KDS-DEC7

High-performance, highly-scalable, AVoIP Decoder for 4K60 4:2:0, HDR10 over 1G Network

Model: KDS-DEC7

Outstanding end-user experience :
Rich set of inputs and interfaces
Easy-to-use KM/KVM - Searchable OSD Menu for KM and fully configurable KVM roaming
Large scale video wall - up to 16x16
Instantaneous switching time - 1 second

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

KDS-DEC7 decoder is an advanced receiver for streaming 4K at 60Hz (4:2:0) video signals via Ethernet over copper cable. It decodes streams over an IP network to HDMI output, and transmit the USB, IR, RS232, or CEC signal over IP network.

Outstanding end-user experience :
Rich set of inputs and interfaces
Easy-to-use KM/KVM - Searchable OSD Menu for KM and fully configurable KVM roaming
Large scale video wall - up to 16x16
Instantaneous switching time - 1 second
Ideal for large-scale deployments :
Highly scalable - 999 channels build in support
State of the art management device
Rich set of management capabilities - Standard P3K Open API , LCD screen for configuration
Robust security:
Enterprise IT-grade security - 802.1x and HTTPS/TLS
Security certification - OWASP Top 10 certificate
Separate ETH ports for optimal security and experience
New HW architecture that enables robust FW update
Simple planning and rollout:
Cost-effective from day one
Full product range for any site, any application
Plug-and-play with Netgear M4250 AVoIP switches, Kramer Control, KDS-USB2, etc.
PoE Support - Using PoE switch - up to 13W consumption
Alternative sources/destinations - HDMI Loop-Through on Encoder and HDMI Input on Decoder
Analog Audio - Embedding and De-embedding
Control gateway - Through P3K control/communicate with IR, RS232, or CEC to the connected devices
Applications:
For real-time essential installations such as command and control rooms
For large scale AV content sharing installations using existing wires and infrastructure in corporate offices and government applications
AV distribution systems with one or more sources and many displays in schools, universities, and public venues
For AV installations where low latency KM/KVM capabilities are required

AV-over-IP - Yes
Decoder or Encoder Signal Type - Audio
Decoder or Encoder Signal Type - Video
IP Signals Supported - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 32 F
Active Power: 6 Watt
Current Draw: 24 Amps
Depth: 5.71 in
Height: 1.09 in
Shipping Depth (with packaging): 7.05 in
Shipping Height (with packaging): 2.99 in
Shipping Width (with packaging): 12.28 in
Width: 7.44 in
Product Weight: 1.54 lbs
Shipping Weight: 1.98 lbs
Inputs: 1 HDMI: On a female HDMI connector
Outputs: 1 HDMI: On a female HDMI connector
Ports: 2 Ethernets: On RJ-45 connectors, 1 Balanced Audio: On a 5-pin terminal block connector, 1 RS-232: On a 3-pin terminal block connector, 1 IR: On a 3.5mm TRS connector, 2 USB: On USB-A connectors
Video: Compression Standard: JPEG based, private stream, Max Resolution: 4K60 4:2:0 or 4K30 4:4:4, HDR 10: Up to 4K30 4:2:2 12 bit
User Interface: Indicators: LINK, NET and ON LEDs, front panel LCD Display, Controls: Restart and factory reset rear panel button, embedded web pages, P3K API commands via Ethernet, front panel navigation buttons
Storage Temperature: -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing
Humidity: 10% to 90%, non-condensing

Decoder 1413273 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Included in Case Studies

Facepunch

in Birmingham, West Midlands, United Kingdom

by Kramer

Suggested Products

Multi-format IP stream to HDMI/SDI decoding module for Modator chassis

by Magewell Electronics

HD HDMI to NDI High Bandwidth encoding module for Modator chassis

by Magewell Electronics

Multi-format IP stream to HDMI decoding module for Modator chassis

by Magewell Electronics