JT-110K-HPC transformer has turns ratio which optimizes the noise performance of many IC amplifiers. Its secondary source impedance varies less than 10% from 20Hz to 20kHz. The primary is fully balanced and its terminals may be reversed to invert polarity, if required. A 30dB magnetic shield package is standard.
Ideal for a variety of IC or discrete input amplifiers
Wide bandwidth -3dB at 1.0Hz and 100kHz
18dB of voltage gain with noise figure of 2.4dB
Input impedance of 1.4kohms for loading loss of 0.9dB
High common-mode rejection 115dB at 60Hz
Audio Transformer Type - Input Transformer
Spec Sheet available - Yes
Operating Temperature (Maximum):
158 F
Operating Temperature (Minimum):
32 F
Maximum Bandwidth:
100 kHz (-3dB)
Impedance Ratio:
150:10k
Input Impedance:
1.49 kohms (1kHz, -20dBu, test circuit 1)
Voltage Gain:
17.8 dB (1kHz, -20dBu, test circuit 1)
Deviation from linear phase (DLP):
+4.5/-0 ° (20Hz to 20kHz, -20dBu, test circuit 1)
Distortion (THD):
0.045 % (20Hz, -20dBu, test circuit 1)
Maximum 20Hz input level:
-2.0 dBu (1% THD, test circuit 1)
Common-mode Rejection Ratio (CMRR) 150ohms Balanced Source:
85 dB (60Hz, test circuit 2)
Output Impedance:
12.9 kohms (1kHz, test circuit 1)
Primary DC resistances:
28.7 ohms
Secondary DC resistances:
2.96 kohms
Capacitances at 1kHz:
166 pF (secondary to shield and case)
Turns Ratio:
1:8.1
Breakdown Voltage:
250 Vrms (primary or secondary to shield and case, 60Hz, 1 minute test duration)