Line Input Transformer with 4:1 Turns Ratio

Model: JT-10KB-DPC

Ideal for balancing any high-impedance unbalanced input
Wide bandwidth -3dB at 0.5Hz and 180kHz
Recommended for levels up to +21dBu at 20Hz
High input impedance of 40kohm
High common-mode rejection of 120dB at 60Hz

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Line input transformers provide the maximum possible Common Mode Rejection of unwanted signals. All models have a single Faraday shield and a 30dB magnetic shield can. Models are available in 1:1, 1:1.4, 1:2, 2:1 and 4:1 ratios. Several models are also available as octal plug-in versions. This transformer is designed for use in wideband line input stages. The secondary source impedance of only 225ohm is an excellent match to ultra-low noise amplifiers. The primary is fully balanced and its leads may be reversed to invert polarity, if required. A 30dB magnetic shield package is standard.

Ideal for balancing any high-impedance unbalanced input
Wide bandwidth -3dB at 0.5Hz and 180kHz
Recommended for levels up to +21dBu at 20Hz
High input impedance of 40kohm
High common-mode rejection of 120dB at 60Hz

Audio Transformer Type - Input Transformer
Audio Transformer Type - Line Transformer
Spec Sheet available - Yes

Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): 32 F
Maximum Bandwidth: 180 kHz (-3dB)
Impedance Ratio: 40k:2.4k
Input Impedance: 41.5 kohm (1kHz, +4dBu, test circuit 1)
Voltage Gain: -12.9 dB (1kHz, +4dBu, test circuit 1)
Magnitude response, ref 1 kHz: -0.04 (20Hz, +4dBu, test circuit 1, Rs=600ohm) and -0.03 (20kHz, +4dBu, test circuit 1, Rs=600ohm) dB
Deviation from linear phase (DLP): +0.6/-0.1 degree (20Hz to 20kHz, +4dBu, test circuit 1, Rs=600ohm)
Distortion (THD): <0.001 (1kHz, +4dBu, test circuit 1, Rs=600ohm) and 0.015 (20Hz, +4dBu, test circuit 1, Rs=600ohm) %
Maximum 20Hz input level: +21 dBu (1% THD, test circuit 1, Rs=600ohm)
Common-mode rejection ratio (CMRR) 50ohm balanced source: 120 (60 Hz, test circuit 2) and 85 (3kHz, test circuit 2) dB
Common-mode rejection ratio (CMRR) 600ohm unbalanced source: 90 (60Hz, test circuit 3) and 55 (3kHz, test circuit 3) dB
Output Impedance: 225 kohm (1kHz, test circuit 1, Rs=600ohm)
Primary DC resistances: 2.5 kohm (RED to BRN)
Secondary DC resistances: 92 kohm (YEL to ORG)
Capacitance at 1kHz: 120 (primary to shield and case) and 115 (secondary to shield and case) pF
Turns Ratio: 4.000:1
Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60Hz, 1 minute test duration)

Transformer 179 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

System-to-System Interface

by RTS

Impedance Matching Transformer

by Lowell Manufacturing Co.