Line Input/Output or Patchbay Audio Isolator Module

Model: DIN-PB

Ideal for patch bay applications
Wide bandwidth of -3dB at 0.4Hz and 200kHz
Recommended for levels up to +21dBu at 20Hz
Voltage loss only 1.9dB in 600 to 600 ohm application
High common-mode rejection of 125dB at 60Hz

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Line input/output or patchbay audio isolator module. This transformer has split primary and secondary windings which can be connected for 1:2 (150:600 ohms), 1:1 (600:600 ohms) or 2:1 (600:150 ohms) operation. Distortion, although specified for 600 ohms sources, will be further reduced by lower impedances.

Ideal for patch bay applications
Wide bandwidth of -3dB at 0.4Hz and 200kHz
Recommended for levels up to +21dBu at 20Hz
Voltage loss only 1.9dB in 600 to 600 ohm application
High common-mode rejection of 125dB at 60Hz

Spec Sheet available - Yes

Input Impedance: 750 ohm (1kHz, +4dBu, test circuit 1)
Insertion Loss: -1.90 dB (1kHz, +4dBu, test circuit 1)
Magnitude response, ref 1 kHz: -0.06 (20Hz, +4dBu, test circuit 1) and -0.02 (20kHz, +4dBu, test circuit 1) dB
Deviation from linear phase (DLP): +0.6/-0 degree (20Hz to 20kHz, +4dBu, test circuit 1)
Distortion (THD): <0.001 (1kHz, +4dBu, test circuit 1) and 0.025 (20Hz, +4dBu, test circuit 1) %
Maximum 20Hz output level: +21 dBu (1% THD, test circuit 1)
Input common-mode rejection (CMRR) 600 ohms balanced source: 125 (60Hz, test circuit 2) and 95 (3kHz, test circuit 2) dB
Output common-mode rejection (CMRR) 600 ohms balanced load: 110 (60Hz, test circuit 3) and 80 (3kHz, test circuit 3) dB
Output Impedance: 750 ohm (1kHz, test circuit 5, Rs=600 ohms)
DC Resistance: 39 (total primary, Pin 7 to Pin 8, Pin 4 and Pin 5 shorted) and 112 total secondary, Pin 11 to Pin 12, Pin 14 and Pin 15 shorted kohm
Capacitance: 676 (total primary to shield and case) and 531 (total secondary to shield and case) pF
Turns Ratio: 1.000:1 (any winding to any other winding)
Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60Hz, 1 minute test duration)
Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): 32 F

Line Module 236 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

24 Port 10G PoE+/PoH+ Injector 750 Watts

by Aurora Multimedia Corp.

RemoteTableKit-Pro™ Table Extension Kit

by Sound Control Technologies

Matrox Mura 4K IP Decode & Display Card - DisplayPort Connection (Fanless)

by Matrox Video