Portable "Lap mixer" with 10 level Remote Controls
Model: RMI-10
Each potentiometer may be assigned by iFlex Sonata software to control any level or combination of levels in a Sonata layout or design.
iFlex mixers can sense if the RMI-10 is present or not, and can be set to revert to levels preset in the layout if the mixer is not present.
Communication from the RMI-10 remote control to an iFlex mixer is by means of RS-485 over standard Cat5e (or better) cable.
A 25 foot length of supple, stranded-conductor Cat5e cable with black jacket is provided. The RJ-45 connector on each end is rubber booted for protection and strain relief.
The RMA-10 remote controls are designed for use with Ivie Technologies iFlex mixers. They consist of a set of six or ten remote control potentiometers built into a stand-alone “lap mixer” body. Over-all construction is very rugged.
Connection to the iFlex mixer is via a single Cat5E or better cable. Programming of the controls is done in the hardware programmer section of the Sonata software.
Each potentiometer may be assigned by iFlex Sonata software to control any level or combination of levels in a Sonata layout or design.
iFlex mixers can sense if the RMI-10 is present or not, and can be set to revert to levels preset in the layout if the mixer is not present.
Communication from the RMI-10 remote control to an iFlex mixer is by means of RS-485 over standard Cat5e (or better) cable.
A 25 foot length of supple, stranded-conductor Cat5e cable with black jacket is provided. The RJ-45 connector on each end is rubber booted for protection and strain relief.