Signal Processing Systems : Receivers & Transmitters : Imagenics - HCE-102TX

HDMI Input CAT5e/6 Output 2 Distribution Transmitter

Model: HCE-102TX

A conversion transmitter that converts and distributes HDMI signals to CAT5e/6 signals.
An HDMI signal extension/distribution system can be configured with the HCD-104 or CRO-HE25RX.
It supports HDCP 1.4/2.2.
CEC is pass-through between input and output 1, HEC and ARC are not supported.
It supports 4K at 30p (4:4:4) / 4K at 60p (4:2:0) and can extend up to 70m.

More Product Information Below

Compare

Project List

Product Info

Tech Specs

HCE-102TX is a conversion transmitter that converts HDMI signals into CAT5e/6 signals and distributes up to two. It supports 4K video, supports RS-232C, 100BASE-TX Ethernet superimposition, and can extend up to 150 m. RS-232C allows bidirectional communication with output 1 or simultaneous unidirectional communication with 2 outputs. Ethernet can communicate between the input and all two outputs. Equipped with EDID emulation function. In addition to the 15 built-in resolutions, you can use a copy of the EDID of the output 1 connected sink device. Low latency up to 10 us at 100 m.

A conversion transmitter that converts and distributes HDMI signals to CAT5e/6 signals.
An HDMI signal extension/distribution system can be configured with the HCD-104 or CRO-HE25RX.
It supports HDCP 1.4/2.2.
CEC is pass-through between input and output 1, HEC and ARC are not supported.
It supports 4K at 30p (4:4:4) / 4K at 60p (4:2:0) and can extend up to 70m.
Signals up to 1080 at 60p (24bit) can be extended up to 150m using long reach mode.
For RS-232C communication, you can select bidirectional communication between input and output 1 or simultaneous unidirectional transmission from input to output 1 to 2.
Ethernet can communicate between the LAN terminal and all two CAT5e/6 outputs.
Equipped with EDID emulator function. You can use 15 built-in resolutions or a copy of the output device.
There is an HDMI active through output.
The attached power cable has a lock mechanism.

Receiver/Transmitter Cable Type - Other
Receiver/Transmitter Format Type - HDMI
Supported Resolution - 4K (4096x2400)

AC Voltage: 100 Volts
Active Power: 15 Watt
Depth: 9.06 in
Product Weight: 4.19 lbs
Transmission Range: 492.13 ft
Height: 1.73 in
Width: 8.27 in

Suggested Products

UCX Matrix Switcher Receiver with HDMI 2.0 inputs and USB 3.1 Gen1 host ports

by Lightware

Transmitter/Receiver w/Bluetooth 4.1 Wireless Technology

by Vanco International

UCX Matrix Switcher Receiver

by Lightware