Ultra High Power 1-piece PA System/Powered Monitor with Wireless Receiver

Model: PA6SR

This system includes wireless receiver and convenient mic stand insert on the bottom of the unit. This allows a quick setup on top of a mic stand, with the PA6SR angled upward for accurate vocal monitoring
The included mic stand adaptor insures a more stable and secure placement on any mic stand
With the optional yoke bracket assembly the PA6SR can be mounted to a wall or ceiling, or attached to a mic stand and angled in any direction
Microphone boom mount on top of the PA6SR eliminates the need for a second mic stand for your microphone
Integrated handle into the top of the enclosure

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

PA system/powered monitor have built in 170 watts amplifier designed to handle the most demanding audio situations. This high tech class D amplifier produces plenty of power to cover a wide variety of applications. This design allows the PA6SR to function both as a stand-alone PA system and as a high-powered vocal monitor to cut through loud stage volumes. For larger gigs that require more coverage, you may simply patch from the preamplifier output to the main house PA, while using the PA6SR as your onstage monitor. The PA6SR also features a built in 18dB Compressor/Limiter circuit with Compressor and Clip LEDs. The Compressor acts to smooth out transient peaks in the signals, thus improving overall sound quality and increasing apparent volume. The Limiter helps protect the woofer and tweeter from being damaged by amplifier distortion. The clip LED indicates when reduction in volume is recommended.

This system includes wireless receiver and convenient mic stand insert on the bottom of the unit. This allows a quick setup on top of a mic stand, with the PA6SR angled upward for accurate vocal monitoring
The included mic stand adaptor insures a more stable and secure placement on any mic stand
With the optional yoke bracket assembly the PA6SR can be mounted to a wall or ceiling, or attached to a mic stand and angled in any direction
Microphone boom mount on top of the PA6SR eliminates the need for a second mic stand for your microphone
Integrated handle into the top of the enclosure
Built in compressor/limiter prevents output distortion
-20dB pad switches on each XLR input allow high-level signals without distortion
3 band equalizer (High, Mid, Low) to adjust the sound to what you want to hear
Pass through on each channel acts as a built in splitter to send signals to a mixer snake or another PA6S
Two way speaker systems are 6.5-inch neodymium high power woofer and 1.5-inch high efficiency Neolite tweeter that allows for wider frequency response
170 watts class D amplifier
Innovative speaker and amplifier designs actually allowed us to reduce the weight of the PA6SR from its predecessors, while improving the performance
Short circuit current limiting, short circuit foldback limiting and thermal short circuit protection

Microphone Type

Product Weight: 6.40 lbs
Speaker Woofer: One galaxy audio SW6.5 ferro fluid cooled 6.5-inch Neolite neodymium woofer
Speaker Tweeter: One ST1.5 fluid cooled 1.5-inch Neolite neodymium titanium dome tweeter
Speaker Nominal impedance: 4 ohms
Speaker Power Handling Capacity: 170 W
Enclosure Materials: Fire retardant styrene
Enclosure Color: Black
Enclosure Dimensions: 7.75 x 11.75 x 6.75 in (197 x 298 x 171mm)
Amplifier Rated Power: 170 watts @ 4 ohms, 180 watts dynamic power
Low Amplifier Equalization: ±12dB peak/dip at 200Hz
Medium Amplifier Equalization: ±12dB peak/dip at 2kHz
High Amplifier Equalization: ±12dB shelving at 10kHz
Amplifier Sensitivity (1W @ 1m): 98 dB (1kHz octave band)
Amplifier Frequency Response: 80Hz to 18kHz
Amplifier Maximum SPL @ clip: 118 dB
Total Amplifier Harmonic Distortion: <0.5% @ 4 ohms
Amplifier Input Connections: Two 1/4-inch balanced/unbalanced two XLR 24V phantom PWR one 1/8-inch stereo line in
Amplifier Output Connections: Two XLR thru outputs one 1/4-inch preamplifier output
Amplifier Indicator LEDs: Power, clip and compressor
AMPLIFIER POWER REQUIREMENTS: 120Vac 60Hz
Amplifier Export: 230Vac 50Hz
Wireless Receiver Oscillation Type: PLL synthesized control OSC
Wireless Receiver Adjustable Frequency: Pre-programmed maximum 96 switchable channels
Wireless Receiver Dynamic Range: 110 dB
Wireless Receiver T. H. D.: Less than 0.5%
Wireless Receiver Squelch: Tone key and noise lock dual-squelch
Wireless Receiver Frequency Response: 70Hz to16kHz (wireless)
Wireless Receiver Operating Range: 160 to 230ft (50 to 70M) (open field) with built-in antenna
Wireless Receiver Antenna Mode: Diversity
Wireless Receiver Sensitivity: 4 microvolts @ 30dB
Wireless Receiver Display Status: LCD indicator displays channel or frequency
Wireless Receiver Channel Select: Set, up, down keys
Wireless Receiver Carrier Frequency Range: 640 to 664 MHz

PA System with Wireless Receiver 427 kb - Other

Project List

Request Quote

Find a Dealer

Find a Distributor

Suggested Products

Public Address and Voice Alarm System

by Bosch Conferencing and Public Address Systems

1000W Portable PA System

by Yamaha Corporation

Plena All Call Station Microphone, Stylish, Unidirectional

by Bosch Conferencing and Public Address Systems