Any spot wireless personal monitor is a great entry-level wireless personal monitor. This system features an 80mW receiver output. The receiver also contains an RF and low battery indicator. The transmitter has L/R level display, stereo XLR/1/4-inch inputs and a headphone output with volume control. The AS-900 is a single channel, fixed frequency unit. The 900 band pack systems make it easy for any band to get personal. The system includes four receivers and one transmitter. It is designed to get the whole band wireless in one package. The AS-900-4 will allow a band to send one stereo mix to 4 individuals (additional receivers may be purchased). It is a great alternative for performers who are tired of lugging around heavy and bulky floor monitors and tired of leaving a gig with ringing ear. The any spot allows the user to move freely around the stage or audience and continue to hear the monitor mix.
Headphone out volume control
RF and low battery indicator
AF L/R indicator
Transmits in stereo or mono
Fixed frequency
XLR/1/4-inch combo input
RF output 10mW
Wireless Receiver Transmission - UHF
Warranty - Yes
Warranty (Length/Type):
3 Years
Operating Temperature (Maximum):
122 F
Operating Temperature (Minimum):
14 F
Maximum Frequency Response (Bandwidth):
16 kHz
Maximum Frequency Response (Bandwidth):
16000 Hz
Minimum Frequency Response (Bandwidth):
80 Hz
Minimum Frequency Response (Bandwidth):
0.08 kHz
System Frequency Range:
630.2 and 659.0 MHz
System Transmitter Output Level:
10 dBm
System Operating Range under Typical Conditions:
150 ft (50m)
System Total Harmonic Distortion:
+/-30KHz deviation 1KHz tone <1%
System Dynamic Range:
>90dB A-weighted
Maximum Transmitter Audio input level:
+6 dBV
Transmitter Gain Adjustment Range:
40 dB
Transmitter Input Impedance:
100 kiloohms
Transmitter Dimensions:
1.5 x 8.3 x 3.78 in (38 H x 212 W x 96 D mm)
Transmitter Weight:
21 oz (605g)
Transmitter Power Requirements:
12 to 18Vdc at 300mA supplied by external power supply
Transmitter XLR Input:
Impedance balanced
Transmitter Pin1:
Ground (cable shield)
Transmitter Pin 2:
Audio
Transmitter Pin 3:
No audio
Receiver Audio Output Level:
80 mW
Receiver Sensitivity:
-94dBm for 30dB
Receiver Image Rejection:
>70 dB
Receiver Dimensions:
3.74 x 2.6 x 1 in (95 H x 65 W x 25 D mm)
Receiver Weight:
3.2 oz (90g) without batteries
Receiver Power Requirements:
2AA size alkaline or rechargeable batteries