Signal Routing / Switching : Routing and Matrix Switchers : Evertz - EMX6-FR

EMX 6RU Router Chassis with 15 Slots

Model: EMX6-FR

Support for 3G-SDI, HD-SDI, SD-SDI, DVB-ASI, SMPTE ST 310 and more
Scalable to 128x128 in a single 6RU frame
Scalable to 288x288 in two 6RU frames
Input expansion in steps of 32
Output expansion in steps of 32

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The EMR is a multi-format modular router that provides a high density solution without compromising functionality. The EMR provides a unified platform for routing video as well as other formats. The EMR uses a proprietary X-Link interface to produce a video router that is both cost effective and powerful. A single 6RU frame can accommodate 128x128 video signals, and expansion beyond this is as easy as adding another frame. With two 6RU frames, the EMR can accommodate 256x256 video signals with full redundancy. The modular design of the EMR means that there are no limitations to the signal formats that can be added to the router, or limitations to the size at which it can be expanded to. Other products that can be combined with the EMR are audio routing, master control switchers, multi-viewers and more.

Support for 3G-SDI, HD-SDI, SD-SDI, DVB-ASI, SMPTE ST 310 and more
Scalable to 128x128 in a single 6RU frame
Scalable to 288x288 in two 6RU frames
Input expansion in steps of 32
Output expansion in steps of 32
Source-by-source intelligent auto configuration
Input equalization (on/off)
Output reclocking (on/off)
ASI mode (on/off)
Variable switch point
Supports the full range of Quartz remote control panels
Full VistaLINK® PRO command & control, SNMP & AVM
Supports a wide selection of control protocols
Ethernet, Serial RS-422/RS-232 connections
Full integration with 3rd party automation systems
High availability, 24/7 design
Full modular design
All modules are hot swappable
All components are front accessible
Passive I/O
External MI connection
Redundant frame controller
Redundant crosspoint
Redundant power supply
VistaLINK® PRO SNMP monitoring of I/O modules

Matrix Switcher Video Input Type - HD/HDMI
Matrix Switcher Video Input Type - Other
Routing Type - Video
Spec Sheet available - Yes

Input Impedance: 75 ohm
Number of Inputs: 32
Number of Outputs: 32
Output Impedance: 75 ohm
AC Voltage (Maximum): 200 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 650 Watt
Depth: 15.75 in
Height: 10.50 in
Width: 19 in
Product Weight: 34.80 lbs
Video Input Formats: SMPTE ST 259, SMPTE ST 292-1, SMPTE ST 310, SMPTE ST 424, ASI
Video Input Signal Level: 800 mV p-p
Video Input Return Loss: > 15dB typical (5-1500MHz), > 10dB typical (1.5-3GHz)
Video Input Cable Equalization: Belden 1855A, 300m @ 270MHz, Belden 1855A, 100m @ 1.5GHz
Video Input Connector: DIN 1.0/2.3
Video Output Formats: Same as input
Video Output Reclocking: Configurable
Video Output Non-Reclocking: Configurable
Video Output Signal Level: 800 mV p-p ±10%
Video Output Return Loss: > 15dB typical (5-1500MHz), > 10dB typical (1.5-3GHz)
Video Output DC Offset: 0±0.5V
Video Output Output Jitter: 0.2UI
Video Output Connector: DIN 1.0/2.3
Max. Oper Current: 9.5 A (@115V AC nominal), 4.0 A (@220V AC nominal)
Single Channel: Approx. 90 Watts
Connector: IEC 60320 - 1 per power supply
Module Capacity: 15 single slot EMR series modules
Weight: Approx. 64.0 lbs with 2 power supplies, all slots occupied
Rack Units (Height): 6