hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Home Technology/Automation
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
Flag
EnglishFrenchGermanItalianPortugueseSpanish
 
Request Quote
evertz

Dual L-Band/Wideband RF Fiber Transmitter, CWDM, DFB Laser, SmartMON™, VistaLINK®

Model: 7807LTxx/yy-2

  • Extended frequency response for extended L-Band, off-air DTV and other signals
  • Protocol independent design - transports all modulation formats
  • LNB power with selectable 13/18V DC, per input
  • LNB current limit & short circuit protection
  • LNB current monitoring for advance warning of LNB failure
Compare
Project List
Product Info
Tech Specs
Documents
The 7807LT-2 is a dual fiber optic transmitter for RF signals in the extended L-Band or wider frequency range. It accepts two RF inputs from coaxial cable and provides two outputs for optical transmission. An RF monitor output is provided for each input, which offers a convenient means of obtaining peak satellite signal strength, or additional signal distribution. With two optical transmitters per single-slot card, the 7807LT-2 provides a high density economical solution. Individual monitoring and control is provided for each signal path. Gain may be adjusted manually or managed automatically via AGC. With SmartMON™, incoming RF signal strength, LNB current, and other data are relayed over the fiber outputs for monitoring at the receiver side through SNMP/VistaLINK® (requires SmartMON™ capable companion fiber receiver). 13/18V DC selectable LNB power with 22kHz tone is also provided on each RF input.
  • Extended frequency response for extended L-Band, off-air DTV and other signals
  • Protocol independent design - transports all modulation formats
  • LNB power with selectable 13/18V DC, per input
  • LNB current limit & short circuit protection
  • LNB current monitoring for advance warning of LNB failure
  • 22kHz tone on/off for LNB local oscillator control, per input
  • RF monitoring output ports for signal peaking and signal distribution
  • Manual gain and AGC modes for tuning optimal CNR performance
  • Available with 1310nm, 1550nm and CWDM laser options
  • Dual fiber transmitters on a single-slot card provides the industry's highest density solution
  • SmartMON™ capability provides remote status monitoring via SNMP without a separate data connection
  • VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
  • Form-C dry contact GPO alarm contacts for monitoring
  • Fiber link provides electrical isolation between antenna and facility, mitigating ground loop and lightning issues
  • Compatible with all 2406LR, 7706LR, 7708LR and 7807LR-2 series receivers
  • The 7807LT-2 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalo
 
Request Quote