Training Aids : Card Readers : Evertz - 7800TM2-XIO-3G

Dual Time Code Processor with GPIO and Serial I/O

Model: 7800TM2-XIO-3G

Two independent video paths supporting 3G/HD/SD-SDI video – supports 525i/59.94, 625i/50, 1080i/60, 1080i/50, 1080p/24sF, 720p/60, 720p/50, 1080p/50 and 1080p/60 and the 1/1.001 divisor versions where applicable - auto sense using SMPTE ST 352 payload ID
1 bypass protected BNC Serial Digital Output from each input – with embedded D-VITC according to SMPTE ST 266 (SDI formats only) and ATC according to SMPTE ST 12-2
1 Monitor output from each input with visual character display of timecode
Reads LTC and transcodes it to D-VITC (SDI only) and/or ATC onto 3G/HD/SD-SDI video
Reads LTC, D-VITC (SDI only) and/or ATC and makes visual Character burn-in

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7800TM2-3G occupies one card slot and the 7800TM2-XIO-3G and the 7800TM2-IRIG-3G occupy two card slots in the 3RU 7800 series frame, which will hold up to 15 modules. The 7800TM2-3G series Modular Time Code Processor expands on the professional line of time code solutions by Evertz. The 7800TM series modules provide dual time code processing paths supporting 3G/HD/SD-SDI video signals. This unit is a combination Generator, Reader and Character Inserter for LTC, D-VITC (SDI only) or Ancillary Time Code (ATC). Applications such as reading LTC, D-VITC or ATC time codes and creating a visual burn-in or "transcoding" LTC to D-VITC or ATC time codes are natively supported. The 7800TM2-XIO-3G version additionally provides 6 GPIOs per channel for control of various functions and for encoding/decoding GPI information in the timecode user bits. It also provides two serial ports that can be used to read timecode from devices supporting the Sony 9 Pin RS-422 compatible ports. The 7800TM2-IRIG-3G version contains an IRIG-B Reader to burn IRIG time into the video as well as inserting the IRIG data into D-VITC and ancillary data packets. The IRIG data source for the burn-in windows is selectable between the IRIG-B reader and the ancillary data/D-VITC IRIG readers. Thje IRIG data can be transcoded to SMPTE time code so that video tapes and servers can be searched using commonly available SMPTE time code based equipment. Most of the regular features of the XIO version are also available on the IRIG version.

Two independent video paths supporting 3G/HD/SD-SDI video – supports 525i/59.94, 625i/50, 1080i/60, 1080i/50, 1080p/24sF, 720p/60, 720p/50, 1080p/50 and 1080p/60 and the 1/1.001 divisor versions where applicable - auto sense using SMPTE ST 352 payload ID
1 bypass protected BNC Serial Digital Output from each input – with embedded D-VITC according to SMPTE ST 266 (SDI formats only) and ATC according to SMPTE ST 12-2
1 Monitor output from each input with visual character display of timecode
Reads LTC and transcodes it to D-VITC (SDI only) and/or ATC onto 3G/HD/SD-SDI video
Reads LTC, D-VITC (SDI only) and/or ATC and makes visual Character burn-in
Reads D-VITC (SDI only) and/or ATC and transcodes to LTC
Character Inserter displays time and/or user bits in the picture – user programmable positioning - available on Monitor and Program outputs
Outputs referenced to input or 7800 frame genlock reference
Card edge menu using OSD to configure the operating modes
Card Edge LEDs for signal presence, module status
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
6 Programmable GPI control inputs per channel (12 total) - select modes
Ability to ‘sniff' Sony Protocol time code and convert to LTC, D-VITC or ATC as required
External Reference BNC
4 Up/Down timers to time program segments - outputs available on separate LTC outputs (total of 4 LTC outputs). Timer control and outputs available via on-board Ethernet port

Spec Sheet available - Yes

Serial Digital Video Inputs - Standard: 270Mb/s SMPTE ST 259-C 10 bit 4:2:2 (525i/59.94, 625i/50); 1.485Gb/s SMPTE ST 292-1 10 bit 4:2:2 (1080i/60, 1080i/50, 1080p/30, 1080p/30sF, 1080p/25, 1080p/25sF, 1080p/24, 1080p/24sF, 720p/60, 720p/50, 720p/30, 720p/25, 2048 x 1080p/30, 2048 x 1080p/25, 2048 x 1080p/24); 2.97Gb/s SMPTE ST 424 & SMPTE ST 425-1 Level A and Level B-DL 10 bit 4:2:2 (1080p/60, 1080p/50, 2048 x 1080p/60, 2048 x 1080p/50)
Serial Digital Video Inputs - Number of Inputs: 2
Serial Digital Video Inputs - Connector: BNC per IEC 61169-8 Annex A
Serial Digital Video Inputs - Signal Level: 1 V nominal
Serial Digital Video Inputs - Input Equalization: Automatic to 100m @ 1.485Gb/s with Belden 8281 or equivalent; Automatic to 80m @ 2.970Gb/s with Belden 8281 or equivalent
Serial Digital Video Inputs - Return Loss: >15dB to 1.5GHz; >10dB to 3.0GHz
Serial Digital Video Outputs - Standard: Same as inputs
Serial Digital Video Outputs - Number of Outputs: 2 PGM (Relay Bypass Protected to Inputs); 2 MON with On Screen Display menu and character burn ins
Serial Digital Video Outputs - Connector: BNC per IEC 61169-8 Annex A
Serial Digital Video Outputs - Signal Level: 800 mV nominal
Serial Digital Video Outputs - HD Rise/Fall Times: 200 ps nominal
Serial Digital Video Outputs - Return Loss: >15dB to 1.5GHz; >10dB to 3.0GHz
Reference Video Input - Type: HD Tri-Level sync, NTSC or PAL Colour Black 1V p-p
Reference Video Input - Connector: Frame Genlock. BNC per IEC 60169-8 Annex A (2 slot versions only)
Reference Video Input - Termination: 75 ?
LTC Inputs and Outputs - Standard: SMPTE ST 12 LTC
LTC Inputs and Outputs - Frame Rates: 24, 25 and 30 fps nominal
LTC Inputs and Outputs - Connector: 2 BNC per IEC 61169-8 Annex A, Micro 9 pin D for auxiliary LTC Outputs
LTC Inputs and Outputs - Number: 1 LTC In, 1 Switchable LTC In or LTC Out, 3 additional auxiliary LTC outputs on XIO version
LTC Inputs and Outputs - Termination: 75 ? unbalanced
LTC Inputs and Outputs - Output Level: 1V p-p nominal unbalanced, 1 V p-p nominal balanced for auxiliary LTC outputs on XIO version
LTC Inputs and Outputs - Input Level: 0.2 to 4 Vp-p unbalanced
IRIG Reader - Standard: IRIG 200-95 Format B122
IRIG Reader - Connector: DB15 Female
IRIG Reader - Input Level: 0.2 to 4 V p-p balanced or unbalanced
GPI/O - Number: 12 configurable as inputs or outputs
GPI/O - Type: Opto-isolated, active low with internal pull-ups to +5 V
GPI/O - Connector: Female DB 15
GPI/O - Signal Level: Closure to ground
GPI/O - Function: User preset select or programmable functions
Serial Ports - Number: 2
Serial Ports - Connector: Female DB 9
Serial Ports - Signal Level: RS-232/RS-422
Serial Ports - Baud Rate: Selectable baud rates (38,400 default)
Serial Ports - Function: Read Sony Protocol time code; Serial A configurable for auxiliary LTC outputs (on XIO version); IRIG CS-5 input or CS-6 output (on IRIG version only)
Physical - Number of Slots: 2
Active Power: 24 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Complies with FCC regulations for class A devices Complies with EU EMC directive

Processor Card 117 kb - Data Sheet

Project List

Find a Dealer