The 7721AE4-HD Audio Embedder inserts AES audio signals into a 1.5Gb/s HD video signal as specified in SMPTE ST 299-1. The companion 7721AD4-HD Audio Deembedder facilitates audio demultiplexing at the destination. SMPTE ST 299-1 allocates four groups of four audio channels that can be embedded into the SMPTE ST 292-1 bitstream. The 7721AE4-HD embeds up to 4 AES audio pairs into two groups on the HD-SDI outputs for discrete 5.1 audio applications. The 7721AE4-HD is Dolby E compliant when the sample rate converters are turned off. VistaLINK® enables control and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage the module status monitoring and configuration from SNMP enabled control systems such as Evertz VistaLINK® PRO locally or remotely (not yet implemented).
Automatic detection of video standard
Bypass relay protection on one SDI output for power failures
24-bit AES input and audio embedding
Individual audio group assignment for each group
Group lock mode maintains phase relationship between the groups for 5.1 audio applications
Sample rate conversion disable on AES inputs to permit Dolby E embedding
Programmable audio delays (up to 7 frames in 1/2 video field increments using DIP switches or up to 1365.313ms in 1 sample increments with VistaLINK® control
Ancillary packet cleaning mode removes all audio before embedding
Ancillary packet reformatting mode left justifies and removes unused packets before embedding
Embeds audio on internally generated black or blue video when there is no video input
Front panel LEDs indicate video and audio signal presence, and module fault
VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
De-embedder/Embedder Type - AES
Spec Sheet available - Yes
Serial Video Input - Standard:
SMPTE ST 292-1 (1.5Gb/s)
Serial Video Input - Formats:
1080i/60, 1080i/59.94, 1080i/50, 1080p/30sF, 1080p/29.97sF, 1080p/25sF, 1080p/24sF, 1080p/23.98sF, 720p/60, 720p/59.94
Serial Video - Number of Inputs:
1
Serial Video Input - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization:
Automatic 100m @ 1.5Gb/s with Belden 1684A or equivalent cable
Serial Video Input - Return Loss:
> 10dB up to 1.5Gb/s
Serial Video Output - Standard:
SMPTE ST 292-1 (1.5Gb/s)
Serial Video - Number of Outputs:
2 (1 bypass relay protected)
Serial Video Output - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Output - Embedded Audio:
Standard: SMPTE ST 299-1; Resolution: 24 bits; Sampling Rate: 48 kHz synchronous
Serial Video Output - Signal Level:
800 mV nominal
Serial Video Output - DC offset:
0V ±0.5V
Serial Video Output - Rise/Fall Time:
200 ps nominal
Serial Video Output - Overshoot:
< 10% of amplitude
Serial Video Output - Return Loss:
> 15dB up to 1.5Gb/s
Serial Video Output - Wideband Jitter:
< 0.2UI
AES Audio Input - Standard:
SMPTE ST 276, single ended AES
AES Audio - Number of Inputs:
4
AES Audio Input - Connector:
BNC per IEC 61169-8 Annex A
AES Audio Input - Resolution:
24 bits
AES Audio Input - Sampling Rate:
32kHz to 96kHz synchronous or asynchronous; 48kHz synchronous AES required when sample rate converter is disabled
AES Audio Input - Impedance:
75 ohms unbalanced
AES Audio Input - Level:
1V p-p ±0.1V
Number of Slots:
1
Active Power:
11 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
FCC Part 15 Class A, EU EMC Directive