The 7707VTxx-4-HS is a Quad SD/Dual HD Fiber Transmitter, CWDM Laser, VistaLINK®. Single card TDM multiplexer for two HD-SDI signals, or one HD-SDI signal and three SDI/DVB-ASI/SDTi signals, or four SDI/DVB-ASI/SDTi signals.
Single card TDM multiplexer for two HD-SDI signals, or one HD-SDI signal and three SDI/DVB-ASI/SDTi signals, or four SDI/DVB-ASI/SDTi signals
Two auto-sensing video inputs for HD-SDI or SDI/DVB-ASI/SDTi video signals
Two 270MB/s inputs for SDI video signals
Signal transport over fiber uninterrupted by loss of any HD-SSDI, SDI, SDTi or DVB-ASI input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Automatic coaxial input equalization up to 100m at 1.485Gb/s and 250m at 270Mb/s (Belden 1694)
Fully hot-swappable from front of frame
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies one card slot and can be housed in the 1RU 7801FR frame
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Active Power:
10 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
Serial Video Input Standards:
SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Input Number of Inputs:
8
Serial Video Input Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input Equalization:
Automatic to 100m @ 1.485Gb/s, and 250m @270Mb/s with Belden 1694A or equivalent
Serial Video Input Return Loss:
> 15dB up to 1.5Gb/s
Serial Video Output Standards:
SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Output Number of Outputs:
8 (+1 monitor with user selectable source)
Serial Video Output Connector:
BNC per IEC 61169-8 Annex A
Serial Video Output Signal Level:
800mV nominal
Serial Video Output DC Offset:
0V ±0.5V
Serial Video Output Rise and Fall Time:
900ps nominal @ 270Mb/s
Serial Video Output Overshoot:
< 10% of amplitude
Serial Video Output Return Loss:
> 12dB
Serial Video Output Wideband jitter:
< 0.2UI
Serial Video Monitor Output Standards:
SMPTE ST 292-1, SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Monitor Output Number of Outputs:
1, signal user-selectable from the 8 inputs & 8 outputs
Serial Video Monitor Output Connector:
1 BNC per IEC 61169-8 Annex A
Serial Video Monitor Output Signal Level:
800mV nominal
Serial Video Monitor Output DC Offset:
0V ±0.5V
Serial Video Monitor Output Rise And Fall Time:
900ps nominal
Serial Video Monitor Output Overshoot:
< 10% of amplitude
Serial Video Monitor Output Return Loss:
> 12dB
Serial Video Monitor Output Wideband Jitter:
< 0.2UI