These quad SDI fiber transmitter transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space, supports single-mode and multi-mode fiber optic cable.
Single card TDM multiplexer for four synchronous or asynchronous 270Mb/s SDI, SDTi or DVB-ASI video signals
Signal transport over fiber uninterrupted by loss of any SDI, SDTi or DVB-ASI input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK® capability
Automatic coaxial input equalization up to 250m at 270Mb/s (Belden 8281)
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Serial Video Input - Standard:
SMPTE ST 259-C, SMPTE ST 305, DVB-ASI
Serial Video - Number of Inputs:
4 independent SDI or DVB-ASI 270Mb/s signals
Serial Video Input - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization:
Automatic to 250m @ 270Mb/s with Belden 8281 or \equivalent cable
Serial Video Input - Return Loss:
> 15dB up to 270Mb/s
Optical - Number of Outputs:
1
Optical Output - Connector:
Female SC/PC, ST/PC or FC/PC