This dual SDI/ASI/SDTi + ethernet SONET/SDH fiber transceiver transports signals at the OC-12/STM-4 rate. It interfaces directly to the SONET/SDH infrastructure.
Transports signals at the OC-12/STM-4 rate
Single card TDM multiplexer for two bi-directional asynchronous SDI, DVB-ASI & SDTi signals
Built-in Ethernet transceiver with one 10/100/1000 Base-T compatible port with FBM (Fiber Bandwidth Management) technology
Interfaces directly to the SONET/SDH infrastructure
Signal transport over fiber uninterrupted by loss of any input feed
Transparently passes embedded AES or any other data in the horizontal or vertical ancillary data space
Stratum 3 wander/holdover/jitter compliance
Wide input frequency range tolerance (±50ppm)
Fully hot-swappable from front of frame
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
SC/PC, ST/PC, FC/PC connector options
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Occupies two card slots and can be housed in the 3RU 7800FR frame which has a 15 slot capacity, or the portable 3RU 350FR frame which has a 7 slot capacity
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Serial Video Input - Standards:
SMPTE ST 259-C, DVB-ASI, SMPTE ST 305
Serial Video - Number of Inputs:
2
Serial Video Input - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Input - Equalization:
Automatic to 250m @ 270Mb/s with Belden 1694 or equivalent cable
Serial Video Input - Return Loss:
> 15dB up to 270Mb/s
Serial Video Input - Frequency Offset Tolerance:
+50 ppm
Serial Video Output - Standards:
SMPTE ST 259-C, DVB-ASI, SMPTE ST 305
Serial Video - Number of Outputs:
2 + 1 monitor with user selectable source
Serial Video Output - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Output - Signal Level:
800 mV nominal
Serial Video Output - DC offset:
0V ±0.5V
Serial Video Output - Rise and Fall Time:
900ps nominal @ 270Mb/s
Serial Video Output - Overshoot:
< 10% of amplitude
Serial Video Output - Return Loss:
> 12 dB
Serial Video Output - Wideband Jitter:
< 0.2 UI
Serial Video Monitor Output - Standards:
SMPTE ST 259-C, DVB-ASI, SMPTE ST 305 (SDTi)
Serial Video Monitor - Number of Outputs:
1 signal user-selectable from the 2 inputs
Serial Video Monitor Output - Connector:
BNC per IEC 61169-8 Annex A
Serial Video Monitor Output - Signal Level:
800 mV nominal
Serial Video Monitor Output - DC Offset:
0V ±0.5V
Serial Video Monitor Output - Rise and Fall Time:
900ps nominal @ 270Mb/s
Serial Video Monitor Output - Overshoot:
< 10% of amplitude
Serial Video Monitor Output - Return Loss:
> 12dB to 270Mb/s
Serial Video Monitor Output - Wideband Jitter:
< 0.2 UI
Optical Output - Standards:
OC-12/STM-4
Optical - Number of Outputs:
1
Optical Output - Connector:
Female SC/PC, ST/PC or FC/PC