Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 7707VATxx-U

SDI with 2 Unbalanced AES Audio Fiber Transmitter, CWDM DFB laser

Model: 7707VATxx-U

SDI video and 2 AES audio fiber optic transmitter
Supports 270Mb/s on 525 or 625 line 4:2:2 component SDI and SDTi (SMPTE ST 305) video signals
Supports 32, 44.1, 48kHz AES audio inputs
Dolby-E™ compatible
AES audio inputs can be synchronous or asynchronous to each other and/or to input video

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

These SDI with 2 unbalanced AES audio fiber transmitter supports 270Mb/s on 525 or 625 line 4:2:2 component SDI and SDTi (SMPTE 305M) video signals.

SDI video and 2 AES audio fiber optic transmitter
Supports 270Mb/s on 525 or 625 line 4:2:2 component SDI and SDTi (SMPTE ST 305) video signals
Supports 32, 44.1, 48kHz AES audio inputs
Dolby-E™ compatible
AES audio inputs can be synchronous or asynchronous to each other and/or to input video
Reclocked SDI output for additional signal distribution or monitoring
Signal transport over fiber uninterrupted by loss of SDI or AES audio input feeds
Low audio to video latency over transport interface
Local display of input SDI signal strength, video format, and EDH errors
Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Automatic coaxial input equalization up to 300m at 270Mb/s (Belden 1694)
Fully Hot-swappable from front of frame with no fiber disconnect/reconnect required
Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant) DWDM wavelengths (ITU-T G.694.1 compliant) also available
Supports single-mode and multi-mode fiber optic cable
Wavelength Range 1270nm to 1610nm

Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Active Power: 10 Watt
DC Voltage: 12 Volts
Regulatory Compliance: FCC Part 15, Class A, EU EMC Directive
Serial Video Input::
Standard: SMPTE ST 259-C, 525 or 625 line component, SMPTE ST 305, (SDTi)
Number of Inputs: 1
Connector: BNC per IEC 61169-8 Annex A
Equalization: Automatic to 300m @ 270Mb/s with Belden 1694 or equivalent cable
Return Loss: > 15 dB up to 270Mb/s
Serial Video Output::
Number of Outputs: 1 reclocked
Signal Level: 800 mV nominal
DC Offset: 0 V ±0.5V
Rise/fall Time: 900 ps nominal
Overshoot: < 10 % of amplitude
Wideband jitter: < 0.2 UI
AES Audio Input::
Balanced: AES3-1992
Unbalanced: SMPTE ST 276
Other: Dolby E™ compatible
Signal Level Balanced: 2V to 7V p-p with level jumper set to HI, 1V to 2V p-p with level jumper set to LO
Signal Level Unbalanced: 1V p-p ±0.1V
Equalization Balanced: 500m @ 48kHz with Belden 1800B or equivalent
Equalization Unbalanced: 2200m @ 48kHz with Belden 8281 or equivalent
Resolution: Up to 24 bits
Sampling Rate: 32, 44.1, 48kHz
Impedance Balanced: 110 ohms
Impedance Unbalanced: 75 ohms
Optical Output::
Power: 0 dBm ±1dBm
Fiber Size: 9µm core / 125µm overall
System Performance::
Video Input to Output Delay: < 1.5 µs
Softswitch™ Disabled: < 1 µs
Softswitch™ Enabled: < 2 ms
Physical::
Number of Slots: 1

SDI with 2 Balanced or Unbalanced AES Audio Fiber Transmitter 64 kb - Data Sheet

Project List

Find a Dealer