Fiber Optic Systems : Fiber Optic Converters : Evertz - 7707OODxxx-2-OC-H

Optical to Optical Wavelength Shifter/Regenerator, DWDM DFB Laser and High Sensitivity Receiver (Line Side), VistaLINK®

Model: 7707OODxxx-2-OC-H

Reclocking and indication for OC-3/STM-1, OC-12/STM-4 and OC-48/STM-16 and a number of other telecom and datacom rates (see specifications)
Non-reclocking mode for support of additional signal rates (125Mb/s-3.187Gb/s)
Full-Duplex
Wide range optical input (1270nm-1610nm)
DWDM wavelengths (ITU-T G.694.1 compliant) available for fiber link connection

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707OO-2-OC are VistaLINK® enabled, optical to optical wavelength shifter/regenerator for telecom and datacom signals. Monitoring and control of card status and parameters is provided locally at the card edge and remotely via VistaLINK®. The 7707OO-2-OC accepts two fiber inputs and provides two optical outputs. All versions accept 1270nm to 1610nm optical input signals on multi-mode or single-mode fiber. The 7707OO-2-OC is available in DWDM configurations.

Reclocking and indication for OC-3/STM-1, OC-12/STM-4 and OC-48/STM-16 and a number of other telecom and datacom rates (see specifications)
Non-reclocking mode for support of additional signal rates (125Mb/s-3.187Gb/s)
Full-Duplex
Wide range optical input (1270nm-1610nm)
DWDM wavelengths (ITU-T G.694.1 compliant) available for fiber link connection
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
Detection and display of optical input power and data rate
Fully hot-swappable from front of frame
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller

Spec Sheet available - Yes

DC Voltage: 12 Volts
Regulatory Compliance: Complies with 24CFR 1040.10 and 1040.11, IEC 60825-1, EU EMC Directive
Optical Inputs Rates (non-reclocked): 125Mb/s-3.187Gb/s
Optical Inputs Wavelength: 1270 to 1610 Nm
Optical Connector: Female SC/PC, ST/PC, FC/PC, SC/APC
Optical Sensitivity: -29 dBm
Max. Input Power: -7 dBm
Optical Input Fiber Size: 62µm core / 125µm overall
Optical Number of Outputs: 2
Optical Return Loss: < 14dB
Optical Output Fiber Size: 9µm core / 125µm overall
Line Side Wavelengths: DWDM C-Band/L-Band (ITU-T G.694.1 compliant)
Line Side Output Power: DWDM +7dBm ± 1dBm
Power: 9 W
Number of Slots: 1

Optical to Optical Wavelength Shifter/Regenerator 63 kb - Data Sheet

Project List

Find a Dealer