E3 Electrical to Optical Converter, CWDM DFB Laser, VistaLINK®.
Electrical to optical converter for E3 (34.368Mb/s)
Automatic cable equalization for up to 300m of high quality 75? coaxial cable
Signal reclocking and jitter attenuation
Output wave shaping for G.703 standards compliance
Loss of signal (LOS) detection/indication (ANSI T1.231-1999 and ITU G.775)
Electrical output drive level control for enhanced distance
Transformer coupled inputs/outputs
Optical output wavelengths of up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
Supports single-mode and multi-mode fiber optic cable
Fully hot swappable from front of frame
Occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure
Comprehensive signal and card status monitoring via four digit card edge display, or remotely through SNMP and VistaLINK® capability
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Spec Sheet available - Yes
DC Voltage:
12 Volts
Regulatory Compliance:
Complies with 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, EU EMC Directive
Input Standard:
G.703 @ 34.368Mb/s
Number of Inputs:
1 isolated
Input Connector:
BNC per IEC 61169-8 Annex A
Input Equalization:
Automatic to 300m with Belden 8281 or equivalent cable
Return Loss:
> 20dB up to 34Mb/s
Output Standard:
G.703 @ 34.368Mb/s
Number of Outputs:
2 reclocked
Output Connector:
BNC per IEC 61169-8 Annex A
Waveform:
Conforms to G.703 compliant masks
Drive Level:
For cable lengths < 70m (Low), For cable lengths > 70m (High)