The 7707CVDTADxxx-A4-F2 is a VistaLINK® - capable composite analog video, 4-channel audio and bi-directional RS-232/422 fiber optic transmitter for broadcast quality video signals.
Single card fiber optic transmitter for analog video, four analog audio and bi-directional RS-232/422
Supports both NTSC and PAL video signals
Broadcast quality analog video and audio performance
2 bi-directional RS-232 or 1 bi-directional RS-422
Superior digital data transmission
Signal transport over fiber uninterrupted by loss of input video, audio or data feeds
Adjustable gain equalization for up to 300m of Belden 1694A coaxial cable
Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes
Active Power:
12 Watt
DC Voltage:
12 Volts
Regulatory Compliance:
Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
Analog Video Input Standards:
NTSC, SMPTE ST 170, PAL, ITU-R 624-4
Analog Video Input Number of Inputs:
1
Analog Video Input Connector:
BNC per IEC 61169-8 Annex A
Analog Video Input Signal Quantization:
12 bits
Analog Video Input System Bandwidth:
5.5MHz
Analog Video Input Input Level:
2V p-p (Maximum)
Analog Video Input Gain Equalization:
Up to 300m of Belden 1694A or equivalent (adjustable)
Analog Video Input Input impedance:
75 ohm
Analog Video Input Return Loss:
> 30dB to 5.5MHz
Analog Video Outputs Standard:
NTSC, SMPTE ST 170, PAL, ITU-R 624-4
Analog Video Outputs Number of Outputs:
1 buffered version of input
Analog Video Outputs Connector:
BNC per IEC 61169-8 Annex A
Analog Video Outputs Output Level:
1V p-p
Analog Video Outputs Output Impedance:
75 ohm
Analog Video Outputs Return Loss:
> 30dB to 5.5MHz
Analog Audio Inputs Number of Inputs:
4
Analog Audio Inputs Type:
Balanced analog audio
Analog Audio Inputs Connector:
12-pin removable terminal block
Analog Audio Inputs Input impedance:
High Impedance (> 20kohm)
Analog Audio Inputs Max. Audio Input Level:
+24dBu
Analog Audio Inputs Signal Quantization:
24 Bits
Analog Audio Inputs Freq. Response:
±0.1dB, 20Hz to 20kHz
Serial Data Ports Number of Ports:
1 RS-422 or 2 RS-232 - Jumper Selectable
Serial Data Ports Connector:
4 pins (plus ground) on 16-pin removable terminal block
Serial Data Ports Baud Rate:
Up to 3Mb/s (Determined by incoming data)