Fiber Optic Systems : Fiber Optic Receivers & Transmitters : Evertz - 7707ADVT15-HD

Analog, SDI or HD Video with AES Audio Fiber Transmitter 1550nm, DFB Laser

Model: 7707ADVT15-HD

Single card fiber optic transmitter for one composite analog or SDI video and four analog or AES signals
Auto-sensing (analog or digital) video and audio inputs
Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
Supports HD (SMPTE ST 292-1) video @ 1.485Gb/s
Supports both NTSC and PAL analog, or 4:2:2 component digital video

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The 7707ADVT15-HD is a Analog, SDI or HD Video with AES Audio Fiber Transmitter 1550nm, DFB laser. Fully hot-swappable from front of frame with no fiber disconnect/reconnect required. Supports single-mode and multi-mode fiber optic cable.

Single card fiber optic transmitter for one composite analog or SDI video and four analog or AES signals
Auto-sensing (analog or digital) video and audio inputs
Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
Supports HD (SMPTE ST 292-1) video @ 1.485Gb/s
Supports both NTSC and PAL analog, or 4:2:2 component digital video
Supports Analog to Digital and Digital to Analog audio conversion
Broadcast quality analog video and audio performance
Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
Supports 32, 44.1, 48KHz AES audio inputs
Dolby E™ compatible
Adjustable gain equalization for analog video for up to 250m of Belden 1694 coaxial cable
Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
Supports single-mode and multi-mode fiber optic cable
Optical output wavelengths of 1310nm, 1550nm and up to 16 CWDM wavelengths (ITU-T G.694.2 compliant)
DWDM wavelengths (ITU-T G.694.1 compliant) also available
Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Other
Spec Sheet available - Yes

Active Power: 16 Watt
DC Voltage: 12 Volts
Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
Analog Video Input Number of Inputs: 1
Analog Video Input Connector: BNC per IEC 61169-8 Annex A
Analog Video Input Signal Quantization: 12 bits
Analog Video Input System Bandwidth: > 5.5MHz
Analog Video Input Level: 2V p-p (maximum)
Analog Video Input Gain Equalization: Up to 250m of Belden 1694 or equivalent (adjustable)
Analog Video Input Impedance: 75?
Analog Video Input Return Loss: > 30dB to 5.5MHz
Analog Video Input SNR: > 70dB
Analog Video Input Differential Gain: < 1.0%
Analog Video Input Differential Phase: < 0.7°
Analog Video Input Passband Ripple:
Analog Video Input NTSC: < ±0.1dB to 4.1MHz
Analog Video Input: < ±0.2dB to 5.5MHz
Analog Video Input PAL: < ±0.1dB to 4.8MHz
Analog Video Input Chroma/Luma Gain: 98% to 103%
Analog Video Input Chroma/Luma Delay:
Analog Video Input Line Time Distortion: 0.012
Standard: Same as Analog Video Input
Analog Video Output Number of Outputs: 1
Analog Video Output Connector: BNC per IEC 61169-8 Annex A
Analog Video Output Level: 1V p-p
Analog Video Output Impedance: 75?
Analog Video Output Return Loss: > 30dB to 5.5MHz
Serial Video Output Number of Outputs: 2 (1 loopback, 1 serial)
Serial Video Output Connector: BNC per IEC 61169-8 Annex A
Serial Video Output Signal Level: 800mV nominal
Serial Video Output DC Offset: 0V ±0.5V
Serial Video Output Rise/Fall Time: 900ps nominal @ 270Mb/s
Serial Video Output: < 270ps @ 1.485Gb/s
Analog Audio Input Number of Inputs: 4
Analog Audio Input Type: Balanced analog audio
Analog Audio Input Connector: 12-pin removable terminal block
Analog Audio Input Impedance: High Impedance (> 20k?)
Analog Audio Input Frequency Response: ±0.1dB, 20Hz to 20kHz
Analog Audio Input THD: < 0.005%, 20Hz to 20kHz
Analog Audio Input Channel Phase Differential: ±1°
Analog Audio Input SNR (weighted): > 85dB
Analog Audio Input Maximum Input Level: +24dBu
Analog Audio Input Signal Quantization: 24 bits
Optical Output Number of Outputs: 1
Optical Output Return Loss: > 14dB
Optical Output Rise/Fall Time: 200ps nominal
Optical Output Fiber Size: 9µm core / 125µm overall
Optical Output Standard: 1310nm, 1550nm (nominal)
Optical Output 1310nm FP (Standard): -7dBm ±1dBm
Number of Slots: 1

4 Channel Analog or AES Audio Fiber Transmitter 82 kb - Data Sheet

Project List

Find a Dealer